Our company is a supplier of ELISA kits. The price is fair. The pre-sale, in-sale and after-sale services are at your service. Provide free test service, please call us!
Human platelet membrane glycoprotein â…£ (GP-â…£) enzyme-linked immunoassay (ELISA)
Kit instruction manual
This reagent is for research use only
Purpose: This kit is used to determine the content of platelet membrane glycoprotein â…£ (GP-â…£) in human serum, plasma and related liquid samples.
Experimental principle:
This kit uses the double antibody sandwich method to determine the level of human platelet membrane glycoprotein â…£ (GP-â…£) in the specimen. The microplate was coated with purified human platelet membrane glycoprotein IV (GP-IV) antibody to make a solid-phase antibody, and platelet membrane glycoprotein IV (GP-â…£) was added to the microwells coated with mAb in turn The HRP-labeled platelet membrane glycoprotein IV (GP-IV) antibody binds to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with platelet membrane glycoprotein â…£ (GP-â…£) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of human platelet membrane glycoprotein IV (GP-IV) in the sample was calculated by a standard curve.
Sample processing and requirements:
1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage.
2. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation.
3. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen. After mixing for 10-20 minutes, centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use.
6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP).
Precautions:
1. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
2. The sealing film is limited to one-time use to avoid cross-contamination.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.
5. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
Kit composition:
Kit composition
48 hole configuration
96-well configuration
save
Instructions
1 serving
1 serving
Sealing film
2 pieces (48)
2 pieces (96)
sealed bag
1
1
Enzyme coated plate
1 × 48
1 × 96
Store at 2-8 ℃
Standard product: 2700ng / L
0.5ml × 1 bottle
0.5ml × 1 bottle
Store at 2-8 ℃
Standard dilution
1.5ml × 1 bottle
1.5ml × 1 bottle
Store at 2-8 ℃
Enzyme reagent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Sample diluent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer A liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer B liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Stop solution
3ml × 1 bottle
6ml × 1 bottle
Store at 2-8 ℃
Concentrated washing liquid
(20ml × 20 times) × 1 bottle
(20ml × 30 times) × 1 bottle
Store at 2-8 ℃
Steps
1. Add sample: set up blank wells separately (the blank control wells do not add samples and enzyme-labeled reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the sample to be tested (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
2. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of the standard products in the first and second wells, and then add the standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 1800ng / L, 1200ng / L, 600ng / L, 300ng / L, 150ng / L)
3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.
4. Mixing solution: Dilute 30 times (20 times of 48T) concentrated washing liquid with distilled water 30 times (20 times of 48T) and then use.
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat 5 times and pat dry.
6. Incubation: The operation is the same as 3.
7. Washing: The operation is the same as 5.
8. Color development: Add 50μl of developer A to each well, and then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
9. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.
10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).
11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
Storage conditions and validity period:
1. Store the kit: 2-8 ℃.
2. Validity: 6 months
Kit performance:
1. The correlation coefficient R between the linear regression of the sample and the expected concentration is above 0.95.
2. The batch and approval shall be less than 9% and 11% respectively
examination range:
100ng / L -2000ng / L
Calculation:
Taking the concentration of the standard as the abscissa and the OD value as the ordinate, draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; then multiply by the dilution factor; Calculate the linear regression equation of the standard curve with the OD value, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply it by the dilution factor to obtain the actual concentration of the sample.
The indoor hanging fireplace is a modern, fashionable and practical ornament with many advantages. First, it has a unique design and can be hung on the wall, saving space and providing more flexibility. Secondly, the indoor hanging fireplace can add warmth and comfort to the interior space, in addition, it can also act as a unique focal point, adding to the visual appeal of the room.
Indoor hanging fireplaces have a wide range of uses. Whether in a family home, apartment, holiday home or commercial premises, it can be used to provide warmth and beauty. It is suitable for all kinds of interior Spaces such as living room, bedroom, office and dining room. Because of its unique design, it can be installed and moved as needed, making it ideal for people who rent homes or need to move frequently.
Carbon steel is one of the commonly used materials for indoor hanging fireplaces. Carbon steel has high strength, wear resistance and corrosion resistance, and can withstand high temperatures and long periods of use. It also has an elegant look that is able to match a variety of interior decoration styles. In addition, the carbon steel material also has good thermal conductivity, which can quickly transfer heat and make the room warm rapidly.
Hanging & Suspended FAQS
1:What are the benefits of a suspended fireplace?
First of all, it can become the focal point of interior decoration, adding beauty and modernity to the room. Its unique design and position hanging in the air make it a striking artwork that can be a highlight of a room. Second, hanging fireplaces can save space. Compared with traditional fireplaces, it does not need to take up floor space and can be installed on the wall or ceiling, making the room more spacious and tidy. In addition, hanging fireplaces burn more efficiently and can provide more heat, making the room more warm and comfortable. Finally, the hanging fireplace can provide 360-degree views, allowing people to enjoy the beauty of the flames from different angles, enhancing the viewing.
2:Can my floating fireplace be wood-burning?
Yes, your floating fireplace can be wood-fired. You may choose to install a wood-burning fireplace so that wood is burned in the fireplace to generate fire and heat.
3:Can a central suspended fireplace be gas-fuelled?
Central hanging fireplaces can use natural gas as fuel. This type of fireplace usually has a modern design and can be hung in the center of the room. The use of natural gas fuel can easily control the size and temperature of the flame, and does not produce smoke and dust. At the same time, natural gas fuel is more environmentally friendly, does not produce carbon dioxide and other harmful gas emissions.
4:What is a ceiling suspended fireplace?
A hanging fireplace is a type of fireplace that is mounted on the ceiling. Unlike traditional fireplaces, hanging fireplaces do not need to be placed on the ground or fixed to the wall, but are suspended through a suspended ceiling. This design allows the fireplace to be more flexible in any location, whether in indoor or outdoor Spaces.
5:What is a wall-hanging fireplace?
A wall fireplace is a type of furnace mounted on a wall. It is usually made of metal and can be hung on the wall without the need for floor space. Wall mounted fireplaces use electricity or gas as fuel to generate warm air through heaters and fans. They usually have adjustable flame effects and temperature control functions that can be adjusted according to personal preferences and needs.
6:Why is carbon steel used for hanging fireplace?
Carbon steel is often used in the production of hanging fireplaces, mainly for the following reasons. First of all, carbon steel has good strength and durability, and can withstand the weight of the fireplace and the pressure of long-term use. Secondly, carbon steel has good thermal conductivity and can quickly conduct the heat in the furnace, so that the fireplace can quickly heat and provide a warm environment. In addition, carbon steel also has the characteristics of high temperature resistance, can withstand the heat and flame generated by high temperature combustion inside the fireplace, to ensure the safe operation of the fireplace. Finally, carbon steel has a lower cost and is relatively economical, making the production cost of hanging fireplaces more manageable.
7:Can I customise my suspended fireplace?
Of course you can customize your hanging fireplace! Custom fireplaces can be designed according to your preferences and home style. You can choose the size, shape, material and color of the fireplace to ensure that it blends perfectly with your room. In addition, you can also choose accessories for the fireplace, such as charcoal fire effects, temperature regulators and remote controls, etc., to increase the function and convenience of the fireplace. Custom fireplaces can meet your individual needs and bring warmth and comfort to your home.
8:How much does it cost to install a suspended fireplace?
The cost of installing a hanging fireplace varies depending on a number of factors, including the make, model, and material of the fireplace, the location and requirements of the installation, and the labor costs of the location. In general, hanging fireplaces usually cost between $1,000 and $5,000, not including installation costs. Installation costs are usually on a case-by-case basis and additional labor costs may be required. Therefore, it is best to consult a professional fireplace installation service provider to get an accurate quote.
9:How do I maintain a hanging fireplace?
A wall-mounted fireplace is a unique heating device that requires regular maintenance to ensure its proper operation and safety. Here are some tips for maintaining a wall-mounted fireplace:
1. Clean the casing: Clean the fireplace casing regularly to remove dust and dirt. You can use a soft cloth or vacuum cleaner to clean, avoid the use of chemical cleaners, so as not to damage the fireplace surface.
2. Clean glass doors: Wall mounted fireplaces usually have glass doors that need to be cleaned regularly to maintain transparency. Use a special fireplace glass cleaner, clean according to the instructions, and avoid scratching the glass with rough materials.
3. Check the combustion chamber: Check the combustion chamber of the fireplace regularly to ensure that no excessive ash or debris has accumulated. If you find a buildup, you can use a small brush or vacuum cleaner to clean up.
4. Check the flue: Check the flue of the fireplace regularly to ensure that it is unimpeded. If accumulation or blockage is found, it should be cleaned up in time to ensure smooth exhaust gas.
5. Regular maintenance: Regularly ask professionals to maintain and overhaul the fireplace. They can perform more in-depth cleaning and inspection to ensure that the various components of the fireplace are functioning properly.
Indoor Fireplaces,Wood Burning Stoves,suspended fireplace,Wood Burning Fireplaces,Modern Fireplace
Henan Jinbailai Industrial Co.,Ltd , https://www.hnjblfirepit.com