The use of engraving machine tips and precautions

First, before we start work, we should carefully check the spelling of the text part of the carving project. If possible, print it out and confirm it with the customer.

Second, the protection of carvings: engraving machine in the carving process, the sculptured objects often misplaced, and we are often distressed to say to customers that their items were damaged during the carving process.

Third, in order to avoid these problems, we can try the following operations:

1. Check if the selected pliers or clips are used incorrectly? At the same time, the wear of the engraving pliers or clips can also lead to misalignment of the sculptured objects. If the pliers or clips are too tight, the ejected objects will also be caused at the instant when the cutter head contacts the objects to be engraved.

2. For those irregularly shaped carved objects, the surface seems to have been fixed tightly, and will also shake back and forth when under pressure. At this time, you can try to put some waste under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregular in shape, the package itself may be very regular and easy to be fixed. In addition, a small band of irregular shape objects is very important. It is easy to be fixed. Or try the tools to fix their regular parts and discard their irregular parts.

3. If the downward pressure on the sculptured object is very large, consider whether you must use a cone nose. If the engraving machine diamond head moves too much pressure during the carving process, the pressure on the side of the tool will cause the sculpture to be carved. Move. If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knives sculpts deep into the material, causing the material to move during the engraving process.

4. As the engraving machine is often equipped with multi-functional pliers or chucks, and they are also made of iron, it is easy to damage the sculptured objects or make it fall off during the engraving process, then use some rubber caps or rubber tubes The fixation of the sculptured objects will help.

5. For engraving plastic patterns, you can paste the transfer tape on the back of the carved object, then spray the liquid on the side with the tape sprayed, and then stick it on a surface that can be discarded, so you can avoid using double-sided The glue leaves a hard-to-clean surface. Because the tape is easy to peel off and clean up. Using special sculpted tapes, this tape is more viscous on one side than on the other, so the plate can be moved or replaced at will.