The main composition and application range of aluminum silver paste

Aluminum paste is mainly composed of aluminum powder, solvents and additives. Aluminum paste can be divided into floating type and non-floating type. Floating silver paste floats on the coated surface due to its low surface tension. It has extremely high reflectiveness and chrome plating effect. However, aluminum flakes can easily fall off from the surface of the paint film. It is difficult to recoating and it is used in anticorrosion, roofing, tanks and other occasions. Non-floating silver paste can be completely wetted by the coating, evenly distributed in the entire paint film, and has a tendency to sink, and the coating film is solid and stable. It can also be recoated and used in a wide range of applications such as transportation, furniture, electronic products, and coils.

Aluminum paste is widely used in automotive paints, motorcycle paints, bicycle paints, plastic paints, architectural coatings, inks, cell phone cases and buttons, electrical and mechanical enclosures, electrical enclosures, metallic paints, and many other fields, but insoluble in water-based paints, silver paste It is a solvent type.

The method of using the aluminum silver paste is to add an appropriate amount of organic solvent to the silver paste, stirring slowly, and the excessively quick stirring will destroy the surface coating of the silver paste. Thoroughly soak, disperse, and unseal, use as soon as possible, and seal well.

Aluminum paste should not be exposed to sunlight, contact with rain, and should be stored in a dry room (35 degrees below) Storage time should not be too long. Once unpacked, it should be used as soon as possible. If it cannot be used once, it should be completely Seal to prevent the solvent in the aluminum paste from evaporating away. Keep it for too long. Please check before use.