(a) Routine inspection:
First, before imposition: Documents must be confirmed by the customer and provide the original documents (samples) and confirmations of the relevant documents.
Second, determine the customer needs: a few open a few colors, whether a knife die, UV (gloss), bump version, bronzing version and spelling left and right turn, up and down turning, positive and negative, the plug version or several Join together or some other special spellings:
Third, the document specifications and layout of the content of the confirmation: text and fonts, colors and specifications (including a variety of shoe boxes, tea boxes and other forms of specifications), patterns and proportions (if the text is too close to the edge)
Fourth, technical inspection of documents:
1, is the normal four-color or spot color, whether trapping or imprinting.
2. Whether there are crosshairs, bite-toothed lines, printing lines (setback colors), or bleeding.
3, pay attention to hot, uneven or varnish position processing.
4. If the background is dark, then the white words above should be bigger.
5, check the information column, whether there is text is not converted and the bitmap is CMYD mode, the format of the location import is not in the (TIF, PSD, EPS) range.
6, when stacked in black and silver or gold, it is best to expose the blank, otherwise the text discoloration is very powerful.
7. When sending a film, send an original document and a jpg (color inkjet) document, otherwise the film cannot be checked.
Fifth, the color, color, text, and hooked logo of the bitmap processing in the file must be checked again. If an error is found, it must be checked again until no error occurs.
Sixth, inspection methods: generally divided into self-examination, called colleagues to check each other, there are questions, a single relatively large or trouble when you check.
Seventh, the cd in the film must pay attention to imprint to inform each other, there is the map must be checked can not be cut no matter what the situation, the file must be clear, what is the mode of what mode, do not call out the film The company goes to change.
Eighth, in the ai, there is no way to find all the colors.
Ninth, let the customer confirm before exporting. If the customer says they don't need to confirm it, it must also be confirmed by the person who handed over the draft to prevent mistakes in the communication process. And it must be carried.
Tenth, when the spell fits, according to the first to be a normal horse riding booked into a few pairs of open (such as 1-16,2-32 with a saddle stitching is not the same), the cover generally have to fight alone, because to increase the thickness, glue There are generally after the equipment installed after the line.
Eleventh, if it is full of dark (very dark), it may be printed twice, or other colors such as Garland, white words to increase.
The twelfth, when making the box must write the specification, the specification uses the 12th character, the cover must write.
The thirteenth, when making the box, the life is done beside the big surface, so that the product will be covered with a lid.
The fourteenth, crosshairs change: the upper and lower left and right centers should write and put on the crosshairs, the cross can be thicker. Around the finished product, we must also make upper corners, and the corners can be thicker, so that paper and printing can be made.
Fifteenth, in the PS palette: the more tuned, the worse the effect will be, the worse the more changes, it is best to use the least steps to achieve the goal.
Sixteenth, if it is a supplemental version, or it is necessary to save the film from being separated, it is necessary to remind the film company (the film that comes out).
Can be set up), Cai Da reminded the size of the box, to remind Lynch or Hercules issued by Hercules (also pay attention to the direction, it is best to bring film in the past).
(2) Points to Note in FREEHAND
First: Use FREEHAND directly as a text effect can not use the photo output. And it will lead to an error in the photo. FreeHAND transparency, EPS chart TIF chart can be released, otherwise it will automatically remove the transparency.
Second: the problem of work, freehand10.0, ps can not exist in the transparent tiff map
Third: The best use of EPS bitmap, or the speed may be very slow.
Fourth: When there are spot colors in the file, and there are pictures, when the picture is stored as DC2.0, select the JPG best quality in the single file for color conversion. There must be a spot color name on the channel. FREEHAND11.0 When there is PHOTOSHOP7.0 stored transparent TIF can not be film.
Fifth: When hyperlinking text, use clones to start the curve from the last one.
(3) Points to note in the CORELDRAW row:
First: whether there is a gradient, pay attention to the imposition of the U-turn may change the direction of the gradient. And when you make a large area, you must pay attention to the softness of the gradient. (including stereoscopic effects)
Second: if there is a transparent color in the picture, the color may become very powerful (can be converted to view the CMYK mode to see the effect). The figure is preferably the CMYK mode, and the color management mode can be remembered when it is RGB. Is optimized to professional output mode.
Third: It is better not to use projection in CORELKRAW, otherwise it must be turned into a bitmap because the result cannot be estimated. Projection phase
The ride must be stamped.
Fourth: Is there a bar code, the color is probably RGB.
Fifth: pay attention to the text in the frame, often forget to change.
Sixth: Note on COORELDRAW spot color version: If the projection effect, etc., may become a solid projection.
Seventh: Be sure to check the document information, check drawings, text, colors, effects, etc.
Eighth: It is stipulated that no special effects can occur in coreldraw. If it does not occur, the next process cannot be obtained.
Ninth: When the version 12.0 is changed to 11.0, the transparent background may become white (in the film company may turn, film must be specially checked).
Tenth: When the black is not imprinted, a piece of white is made at the end of Eileen's film. Otherwise, the film may be imprinted, and a 2% component of the three-color cmy color may be added to the film.
First, before imposition: Documents must be confirmed by the customer and provide the original documents (samples) and confirmations of the relevant documents.
Second, determine the customer needs: a few open a few colors, whether a knife die, UV (gloss), bump version, bronzing version and spelling left and right turn, up and down turning, positive and negative, the plug version or several Join together or some other special spellings:
Third, the document specifications and layout of the content of the confirmation: text and fonts, colors and specifications (including a variety of shoe boxes, tea boxes and other forms of specifications), patterns and proportions (if the text is too close to the edge)
Fourth, technical inspection of documents:
1, is the normal four-color or spot color, whether trapping or imprinting.
2. Whether there are crosshairs, bite-toothed lines, printing lines (setback colors), or bleeding.
3, pay attention to hot, uneven or varnish position processing.
4. If the background is dark, then the white words above should be bigger.
5, check the information column, whether there is text is not converted and the bitmap is CMYD mode, the format of the location import is not in the (TIF, PSD, EPS) range.
6, when stacked in black and silver or gold, it is best to expose the blank, otherwise the text discoloration is very powerful.
7. When sending a film, send an original document and a jpg (color inkjet) document, otherwise the film cannot be checked.
Fifth, the color, color, text, and hooked logo of the bitmap processing in the file must be checked again. If an error is found, it must be checked again until no error occurs.
Sixth, inspection methods: generally divided into self-examination, called colleagues to check each other, there are questions, a single relatively large or trouble when you check.
Seventh, the cd in the film must pay attention to imprint to inform each other, there is the map must be checked can not be cut no matter what the situation, the file must be clear, what is the mode of what mode, do not call out the film The company goes to change.
Eighth, in the ai, there is no way to find all the colors.
Ninth, let the customer confirm before exporting. If the customer says they don't need to confirm it, it must also be confirmed by the person who handed over the draft to prevent mistakes in the communication process. And it must be carried.
Tenth, when the spell fits, according to the first to be a normal horse riding booked into a few pairs of open (such as 1-16,2-32 with a saddle stitching is not the same), the cover generally have to fight alone, because to increase the thickness, glue There are generally after the equipment installed after the line.
Eleventh, if it is full of dark (very dark), it may be printed twice, or other colors such as Garland, white words to increase.
The twelfth, when making the box must write the specification, the specification uses the 12th character, the cover must write.
The thirteenth, when making the box, the life is done beside the big surface, so that the product will be covered with a lid.
The fourteenth, crosshairs change: the upper and lower left and right centers should write and put on the crosshairs, the cross can be thicker. Around the finished product, we must also make upper corners, and the corners can be thicker, so that paper and printing can be made.
Fifteenth, in the PS palette: the more tuned, the worse the effect will be, the worse the more changes, it is best to use the least steps to achieve the goal.
Sixteenth, if it is a supplemental version, or it is necessary to save the film from being separated, it is necessary to remind the film company (the film that comes out).
Can be set up), Cai Da reminded the size of the box, to remind Lynch or Hercules issued by Hercules (also pay attention to the direction, it is best to bring film in the past).
(2) Points to Note in FREEHAND
First: Use FREEHAND directly as a text effect can not use the photo output. And it will lead to an error in the photo. FreeHAND transparency, EPS chart TIF chart can be released, otherwise it will automatically remove the transparency.
Second: the problem of work, freehand10.0, ps can not exist in the transparent tiff map
Third: The best use of EPS bitmap, or the speed may be very slow.
Fourth: When there are spot colors in the file, and there are pictures, when the picture is stored as DC2.0, select the JPG best quality in the single file for color conversion. There must be a spot color name on the channel. FREEHAND11.0 When there is PHOTOSHOP7.0 stored transparent TIF can not be film.
Fifth: When hyperlinking text, use clones to start the curve from the last one.
(3) Points to note in the CORELDRAW row:
First: whether there is a gradient, pay attention to the imposition of the U-turn may change the direction of the gradient. And when you make a large area, you must pay attention to the softness of the gradient. (including stereoscopic effects)
Second: if there is a transparent color in the picture, the color may become very powerful (can be converted to view the CMYK mode to see the effect). The figure is preferably the CMYK mode, and the color management mode can be remembered when it is RGB. Is optimized to professional output mode.
Third: It is better not to use projection in CORELKRAW, otherwise it must be turned into a bitmap because the result cannot be estimated. Projection phase
The ride must be stamped.
Fourth: Is there a bar code, the color is probably RGB.
Fifth: pay attention to the text in the frame, often forget to change.
Sixth: Note on COORELDRAW spot color version: If the projection effect, etc., may become a solid projection.
Seventh: Be sure to check the document information, check drawings, text, colors, effects, etc.
Eighth: It is stipulated that no special effects can occur in coreldraw. If it does not occur, the next process cannot be obtained.
Ninth: When the version 12.0 is changed to 11.0, the transparent background may become white (in the film company may turn, film must be specially checked).
Tenth: When the black is not imprinted, a piece of white is made at the end of Eileen's film. Otherwise, the film may be imprinted, and a 2% component of the three-color cmy color may be added to the film.
Light therapy is suitable for depression prevention programs to play a huge role in the treatment of depression. When we start a beautiful day by bathing in the warm morning light every morning, full of energy in work and study, and full of hope for the future, as long as we have a well-made light therapy lamp, you can easily achieve this goal.
Light Therapy Lamp Best,light Therapy Lamp for Depression,Light Therapy Lamp
Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com