Rubber watertight joint method

      Waterstop joints have cold and hot junctions. The cold connection method is generally used in the construction site where flammable and explosive materials are present. In general, the cold connection is used to cool the two joints, and the cold joint is used to thin the two joints and then apply a thin layer of adhesive. When the adhesiveness is only available, the two joints are placed in a predetermined position to be glued and pressed, and the concrete can be poured after 30 minutes; the hot joint method is used to clean the two joints of the water stop tape to remove impurities; first put the specified model The electric heating joint mold is preheated, and the two joints are placed in the mold, and the unvulcanized rubber compound is put on the two joints up and down, pressurized, heated, and the joint is completed after a certain time. The cold or hot junction strength is greater than the water stop body, to meet the engineering needs of water.    
     Our company produces and sells a variety of engineering rubber products all the year round , has many years of production and sales experience , first-class management and technical personnel , advanced mechanical equipment , for you to create the most solid product quality foundation .