[ Chinese wardrobe network ] The demographic composition of each family is not the same, some are two families, some will have the same age parents or children, each type of people have different needs for wardrobes , this is when many families are designing wardrobes Very rarely considered. Older parents stack more clothes, usually less hanging pieces, so you can consider making more layers and drawers when designing, while the elderly should not climb or squat due to physical condition, the drawer in the closet should not be placed at the bottom. It should be about 1 meter above the ground. If conditions permit, it is best to consider lifting the hanger on the upper level of the wardrobe.
Children's clothing, usually less hanging pieces, stacked more, and considering the placement of children's toys, it is best to consider a large cabinet when designing the wardrobe, only the upper layer of the pendant, the lower layer is vacant, convenient Children can open the door to pick up and collect toys at any time to meet the children's fun attitude.
Young couples’ clothing is diversified. Generally, the left and right sides are respectively set as the storage space for each of the men and women. The hangers in the cabinet are usually divided into two layers, the coat and the top, and the shirts can also be placed in separate small drawers or shelves, which are not wrinkled by the excessive laundry. Underwear, ties and socks can be used for special small plaids, which are good for clothing maintenance and more intuitive and convenient; sweaters can be placed in deep drawers; trousers are stored in special hangers.
Partition by replacement frequency
Although there is a lot of clothing in every family, if the space is planned and used unreasonably, it is easy to find a piece of clothing to look through the wardrobe, or a piece of your favorite clothes lying in a corner for a long time to idle. In fact, there are not many clothes to be replaced in each season. The designer suggests that the wardrobe can be divided into three areas according to the frequency of clothing replacement: the season, the season, and the regular change. Three compartments are arranged at the top of the closet for stacking three seasons of clothing, while the lower part of the lower part is placed on the inside of the sliding door to store the season's clothing. It can also be stacked, but it is easier to pick than the top. use. Arrange several drawers and hanging areas on the sides of the middle of the closet near the sliding door to store the most frequently changed clothes, so that the season clothes will be moved from the middle stacking area to the top over-season area each season. When the season's clothing is changed from the top to the season, there will be no sweaters when looking for T-shirts. When looking for coats, it is full of annoying shirts. In addition, think about the suits that will be worn next week, and change the three or five sets of clothes to the normal change area near the sliding door. Because this area has the clothes, you can also iron it on the weekend. Get up, so you don't have to iron your clothes with fatigue on weekends.
Follow the wardrobe size specification
Generally speaking, each storage space of the wardrobe is dimensionally elegant. According to the designer, the height of the hanging short coat or top is not less than 800mm; the height of the long coat is not less than 1400mm; the height of the drawer is not less than 150mm~200mm; as for the cabinet with stacked clothes, after folding the clothes In terms of the width, the width of the cabinet is between 330mm and 400mm, and the height is not less than 350mm. The upper end of the whole wardrobe is usually set up to place unused items such as quilts, and the height is not less than 400mm.
Due to the different structure of each type of house, pillars and beams may appear on the wall of the installation cabinet. These beams and columns should be used as much as possible to maximize the use of the storage space of the cabinet without leaving a sanitary corner. At this time, the height of the cabinet is usually 2400mm or 2300mm, but the height of the object exceeds 2.1 meters, which requires a ladder to help and easily cause structural instability. Therefore, designers usually recommend that the cabinet be divided into two sections. Place a layer of quilts and other objects that are not commonly used.
Outdoor Beach Chair brings you a wonderful lounge time at seaside or poolside.The materials synthetic PE rattan,aluminium frame and waterproof cushion are resistant to difference weather conditions and easy to maintain.
Outdoor Beach Chair is crafted from rattan wicker weaved into an aluminium frame. This combination help make this chair durable and comfortable all at once. The adjustable backrest allows you to adjust to different positions so that you can relax on the patio or by the pool.
Features
· For outdoor and indoor use
· High quality rattan plait
· Suitable to all weather conditions
· Easy to maintain
· Matches any outdoor decor
· Quick to assemble
· Adjustable backrest
Maintenance tips
· Do not use any abrasive cleaning agents for cleaning
· Clean the chaise lounge with a damp, soft cloth (you may use a mild cleaning agent) and wipe it dry afterwards
· In case of ceaseless heavy rain or during the winter, the furniture should be stored inside or have a protective cover on it
Outdoor Beach Chair is ranged in different style: Rattan Chair,Sing Mesh Chair,Aluminium Powder Coat Chair.Single and double chairs are available for option.
If you have any questions, please contact with us directly. Outdoor Sofa Furniture are produced
by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Rattan Beach Chair,Sun Lounger Beach Chair,Pool Beach Chair,Chaise Lounger Beach Chair
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gegardensets.com