AP600 Labeling Machine: Slam Dunk 600 Bottles/Minute

With the development of the beverage market, beverage companies are all in need of modern, efficient equipment. Two years ago, the speed of filling equipment was about 24,000 bottles/hour. Now, the speed of filling equipment has reached 36,000 to 48,000 bottles/hour. The increase in the speed of the front-end equipment inevitably requires that the equipment in the rear-stage equipment follow, especially the increase in demand. Standard equipment speed. In addition, the bottle design changes very much, more and more curve bottles, so the labeling equipment has received great attention, and more beverage companies began to choose the labeling equipment, and the shrink film cost price is much lower than the labeling paper It is more conducive to the promotion and application of sleeve labeling machinery. These reasons prompted the rapid development of the labeling equipment in the past one or two years. 

Firstly, the speed of the labeling machine is required to speed up to accommodate the high-speed front stage. At present, the sleeve labeling machine uses a servo motor, multi-axis controllers, and computer integrated control to form a high-precision electronic control system, which enables the production speed of the labeling machine to be 400 bottles. Increase to 600-800 bottles/minute per minute to meet the speed requirement of the entire line. In addition, with the increase in the change in the bottle type and the speed of the production line, the shrinking method and the contraction effect of the sleeve labeler are required to be closely followed. With the increase of the shrinkage effect of the label, steam-type shrinkage is increasingly recognized by users. The steam shrinking nozzle of the steam shrinking furnace can be arbitrarily adjusted in direction to match the bottle curve to achieve the best shrinkage effect, and the shrinkage is smooth.

The AP600 of Taiwan's Li & Fung Machinery Co., Ltd. has a first-of-its-kind automated pick-up agency (optional) that greatly reduces labor intensity. The unique design of synchronous transmission mechanism, cutter knife cutter, proud of their peers. Use Japanese servomotors for high speed and excellent stability. At the same time with high-tech computer control, low failure rate, rapid maintenance.

Let us interpret the AP600's device features:

(1) Synchronous transmission machinery, a drive belt, and six sets of drive transmission standard axes, any drive belt replacement and maintenance can be completed within three minutes, compared with the traditional multi-layer boom replacement and maintenance more than six hours, easy maintenance, Simple maintenance does not affect production.

(2) The unique knife holder design in the country is suitable for Ф30-Ф130mm containers. The cutter holder is completely free from replacement and debugging, leading the same kind of products. The new cutter design has smooth cut surface and beautiful shrinkage.

(3) Modular design, the host uses electric lift, fine-tuning scale (0.02mm) fine-tuning ruler of each fine-tuning part, adjust more quickly. It is guaranteed that the specification can be replaced in 10 minutes without the use of auxiliary tools.

(4) Double-shrink label feed tray design, high degree of height; microcomputer automatic calculation, free setting, no adjustment, as long as a single press, the label is automatically detected, automatic positioning; change the standard is absolutely fast and easy, cut off the position absolutely accurate .