1. The ceramic anilox roller and the chrome anilox roller will have ink clogging, so they must be cleaned after use. It is recommended to use a stainless steel brush for cleaning. After anilox roller is used for half a year to a year, thoroughly clean the roller with ultrasonic cleaning to remove the dry ink remaining on the bottom of the mesh hole. Regularly check and verify the volume of the anilox to ensure that the anilox roller is in a stable state.
2. The ceramic anilox roller is more resistant to wear than the chrome anilox roller, but the ceramic coating on the roller surface is very thin and the mesh holes are very small. Once bumped, it is easy to cause permanent damage. Therefore, when installing or removing the anilox roller, be careful to apply even force to prevent the surface of the anilox roller from being hit by other metals and other objects.
3. For the ceramic coating on the surface of the anilox roller, it will not rust itself, but because the ceramic coating presents a combined structure of flat particles stacking, which is porous, the liquid under the coating may penetrate the base of the coating It rusts on the roller, thereby destroying the bonding strength between the ceramic coating and the base roller and affecting the printing quality. Therefore, when the anilox roller is not used, the anilox roller after cleaning should be kept in a dry state.
Liquid Foundation,Foundation Sunscreen Waterproof,Bb Foundation Cream,Cream-Foundation
Guangzhou Shishi Daily Chemical Co.,Ltd. , https://www.cosmeticok.com