[ Chinese wardrobe net ] sliding door wardrobe is a very good type of wardrobe, many consumers have to buy and use in the home, and after purchasing the sliding door wardrobe, it is very important to install according to its structure. So Xiaobian is here to introduce how to assemble the drop-down wardrobe.
Sliding door wardrobe assembly tool selection
Generally, the sliding door wardrobes, track boxes and push-pull facades that have been purchased in the market have been produced and formed. In the process of installing the sliding door of the wardrobe, only the sliding door needs to be fixed in the track box. The tools we need to use in this process are mainly six-grid wrenches, plum screwdrivers and hardware accessories.
Sliding door wardrobe assembly and installation steps
1. Distinguish and clean the main parts of the sliding door and the installation position. It is necessary to distinguish the sliding door upper and lower track boxes here.
2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed on the upper end of the wardrobe, and the surface level of the wardrobe.
3. The track box like the flat plate is the lower end, which is fixed about ten millimeters from the cabinet surface, and the moving door is put in. In the final step, just use a six-grip wrench to adjust the height of the hole wheel to level the surface of the wardrobe.
Sliding door wardrobe assembly considerations
1. Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door. For example, the position of the drawer in the cabinet should avoid the intersection of the sliding door and be at least 25px higher than the bottom plate; the drawer in the folding cabinet should be at least 375px from the side wall. Pay special attention to the power switch and socket on the wall. The sliding door should be closed and the position of the switch and socket should be changed.
2. Regardless of the ground on which you make any material, ensure that the level of the door is kept horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm. Do not install the corner line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line.
The above is the structure and installation method of these sliding door wardrobes. I hope everyone can use them as a reference to understand. It is believed that only the reasonable installation work according to the structure of the product can ensure the correct installation of the sliding door wardrobe. There will be no malfunctions during use to affect our use.
Nail Gel Polish Raw Material,Nail Sticker Gel,Gel Nail Art Liner,Cat'S Eye Nail Art
GuangZhou CCO Cosmetic Co., Ltd , https://www.nailcocome.com