One of the most important principles of packaging design is that the design must be achievable in production. The most closely related to print printing is prepress printing technology. The ever-changing computer design and prepress printing have made the traditional hand-painted design a historical one. Network transmission and digital printing have also opened up design ideas and enriched design methods for designers. However, many new problems have emerged. Many "technical factors" have never been encountered by previous graphic designers.
Packaging design is a systematic work, involving many factors, such as materials, structures, graphic design and manufacturing processes, etc. It is by no means simple to draw an image. Therefore, the packaging design of developed countries is usually completed by a group. Both packaging professionals who understand materials and structures, as well as graphic designers, as well as salespeople and engineers from manufacturing companies, participate in the consultation and strive to perfect the design and achieve it in production.
There are some misunderstandings in the packaging design practice of our country's enterprises, which mainly include the heavy plane and light structure; the heavy design effect and the light production process. The direct cause of this problem is that our country's packaging design is mainly completed by art designers. These people are almost all learning arts origins, and have great limitations in the understanding of materials, structure and processing technology. The continuous emergence of new materials and new technologies can open up the creative space for designers, but it is also a challenge. The rapid development of new design methods, printing methods and prepress technology has also had a profound impact on the designer's design activities. New technologies such as computer design, networked transmission and digital printing directly affect the design work of designers. Therefore, packaging designers must be aware of possible problems in the design process in a new environment. Use appropriate fonts Before using a computer for page design, discuss with prepress service providers and printers to determine whether to use hard-copy or electronic files. If you decide to use electronic documents, fonts are the main factor in determining whether a design job can be displayed at the time of output. Whether to use TrueType fonts, Postscript fonts, or Unicode fonts must be discussed with prepress service providers and printers to avoid possible problems with the output fonts. If possible, convert the font into a graphic in an EPS (compressed page description file) file.
For prepress service providers, the general problem is the font-induced placement or page description error when importing EPS files. But avoid "nesting" EPS files. The EPS file contains other EPS files that can cause output errors or increase output time. The problem is simplified by replacing the use of import or insert functionality by copying and filling elements from one EPS file to another. Reverse fonts are often used to reverse fonts, but use them with caution. Most of the reversed fonts are hard to read. Be especially careful when inverting fonts by processing color images. These images often contain light and dark areas, making reversed fonts difficult to read. See the output section and the technical manual for more information on trapping. Use a more pronounced color in the shaded part of the font, and dot points are at least 70% above.
In addition, to ensure that the inverted font is readable, you should also avoid using small or fine fonts. The size of the font must not be less than 6 pounds or the minimum size of characters must not be less than 0.007 inches. Sans serif fonts and bold fonts are the best choice for reversing fonts. OPI or APROPI (Open Print Interface) or APR (Auto Image Replacement) is the most accurate way to position the output image of the page. If the prepress service provider supports OPI or APR, they will scan the image for you and give you a low-resolution image for the positioning of the page output file. When you send jobs to a prepress service provider, their software automatically matches and replaces low-resolution images with high-resolution images. This workflow [encyclopedia] can provide you with smaller files that can be operated faster and easier. See the page output section for more information on working with OPI and APR files. The impact of post-processing on output In the planning and design phase, post-processing issues must be considered. If any coating material is used, whether special effect treatment is required, such as: hot stamping, convex printing, screen printing, coating, etc.
In addition, if more post-processing is required, it should also be considered in the operating time, leaving time for completion. Printing on digital presses As the industry is gradually evolving toward an all-digital printing workflow, digital printing has become more widespread and more widely accepted.
Packaging design is a systematic work, involving many factors, such as materials, structures, graphic design and manufacturing processes, etc. It is by no means simple to draw an image. Therefore, the packaging design of developed countries is usually completed by a group. Both packaging professionals who understand materials and structures, as well as graphic designers, as well as salespeople and engineers from manufacturing companies, participate in the consultation and strive to perfect the design and achieve it in production.
There are some misunderstandings in the packaging design practice of our country's enterprises, which mainly include the heavy plane and light structure; the heavy design effect and the light production process. The direct cause of this problem is that our country's packaging design is mainly completed by art designers. These people are almost all learning arts origins, and have great limitations in the understanding of materials, structure and processing technology. The continuous emergence of new materials and new technologies can open up the creative space for designers, but it is also a challenge. The rapid development of new design methods, printing methods and prepress technology has also had a profound impact on the designer's design activities. New technologies such as computer design, networked transmission and digital printing directly affect the design work of designers. Therefore, packaging designers must be aware of possible problems in the design process in a new environment. Use appropriate fonts Before using a computer for page design, discuss with prepress service providers and printers to determine whether to use hard-copy or electronic files. If you decide to use electronic documents, fonts are the main factor in determining whether a design job can be displayed at the time of output. Whether to use TrueType fonts, Postscript fonts, or Unicode fonts must be discussed with prepress service providers and printers to avoid possible problems with the output fonts. If possible, convert the font into a graphic in an EPS (compressed page description file) file.
For prepress service providers, the general problem is the font-induced placement or page description error when importing EPS files. But avoid "nesting" EPS files. The EPS file contains other EPS files that can cause output errors or increase output time. The problem is simplified by replacing the use of import or insert functionality by copying and filling elements from one EPS file to another. Reverse fonts are often used to reverse fonts, but use them with caution. Most of the reversed fonts are hard to read. Be especially careful when inverting fonts by processing color images. These images often contain light and dark areas, making reversed fonts difficult to read. See the output section and the technical manual for more information on trapping. Use a more pronounced color in the shaded part of the font, and dot points are at least 70% above.
In addition, to ensure that the inverted font is readable, you should also avoid using small or fine fonts. The size of the font must not be less than 6 pounds or the minimum size of characters must not be less than 0.007 inches. Sans serif fonts and bold fonts are the best choice for reversing fonts. OPI or APROPI (Open Print Interface) or APR (Auto Image Replacement) is the most accurate way to position the output image of the page. If the prepress service provider supports OPI or APR, they will scan the image for you and give you a low-resolution image for the positioning of the page output file. When you send jobs to a prepress service provider, their software automatically matches and replaces low-resolution images with high-resolution images. This workflow [encyclopedia] can provide you with smaller files that can be operated faster and easier. See the page output section for more information on working with OPI and APR files. The impact of post-processing on output In the planning and design phase, post-processing issues must be considered. If any coating material is used, whether special effect treatment is required, such as: hot stamping, convex printing, screen printing, coating, etc.
In addition, if more post-processing is required, it should also be considered in the operating time, leaving time for completion. Printing on digital presses As the industry is gradually evolving toward an all-digital printing workflow, digital printing has become more widespread and more widely accepted.
dressers for bedroom,wood dresser,solid wood dresser,modern dresser
Famous Home Living(Dongguan)Co.,ltd , https://www.famoushomeliving.com