Many consumer custom cabinets are easy to go to the building materials market, because there are too many materials, the same material of the cabinet board, the name is varied and even misleading and deceptive.
This article will share with you the nine most common types of consumers: EGGER board, Ou Song board, Australian pine board, Hexiang board, aldehyde-free board, original board, North American solid wood, Australian solid wood and negative ion board.
01, EGGER board
The EGGER board is an artificial board produced by the Austrian EGGER Group (founded in 1961) by FRITZ EGGER GMBH Co. in 17 factories in Europe. It is a kind of particle board, which is selected from coniferous trees grown in the frigid zone of the European continent (mainly Pine).
Advantages and disadvantages: Since the glue used is urea-formaldehyde resin glue, the environmental protection of cheap plates and good plates is very different. There are only those that meet the national standard E1 level ≤1.5mg/L, and also have environmental protection European standard E0 formaldehyde emission ≤0.5mg /L.
EGGER board is imported sheet, mainly three agents (Shanghai, Beijing, Guangzhou), no domestic board. Since the surface substrate is covered with a special impregnated surface layer with anti-scouring and acid and alkali resistance, it is more resistant to scratch than the general particle board, and the wear resistance number reaches 9000 or more. The environmental protection is relatively high, and all reach the E0 level.
02/Ou Song board
The scientific name of "Ou Song Ban" is OSB oriented structural particle board. It is made of small diameter material, thinned wood and wood core. It is processed into 40-100mm long, 5-20mm wide and 0.3-0.7mm thick by special equipment. A sheet of oriented structure made by de-oiling, drying, sizing, directional paving, hot forming, and the like.
Advantages and Disadvantages: Environmental protection is the most concerned issue for everyone. Many people think that particle board glue is more, and there is less glue on the large core board and finger joint board, so the particle board is not good, but the glue is also good or bad. Ou Song board is made of formaldehyde-free glue and is processed locally in Germany. It meets the highest environmental standard EN300 in Europe. It is the highest grade decoration material on the market and is a true green building material.
1. No deformation, high hardness and high strength. This is very important. I believe that many people have been harmed by inferior board furniture. The furniture that has just been used for less than a year has begun to deform, which gives us the impression that the panel furniture has poor quality and is not durable. Ou Song board is used as a building material, and its strength is naturally needless to say.
2, you can directly brush the oil on the surface to achieve a natural style, more suitable for "landscape and other design style."
3, waterproof and moisture-proof ability, some northern solid wood furniture shipped to the south to sell, the sample can not be opened to the drawer, and the furniture made of Ou Song board does not have to worry about this problem.
4, strong nail holding power
5, saving wood, you can use wood processing scraps efficiently.
6. It is easier to process, has excellent bending strength, excellent plasticity and processability, and can be made into any shape.
03, Australian pine board
The name of the Australian pine board and the Osong board sounds a lot like it. Are they the same? In fact, these two are completely different varieties, and the various characteristics are different, even different.
Australian pine board, which is an imported medium-density board, and the core material is pine wood, which is made by sizing and pressing wood fiber. The Australian pine board inherits the characteristics of the MDF, has high hardness and is not easy to be deformed, and the floor performance is better than the traditional large core board.
Advantages and Disadvantages: Australian pine board is an ideal wood product made by combining natural and human creativity. The thickness is usually 2.5mm-50mm. It has a well-balanced structure with smooth edges and excellent mechanical properties. Its strength and stability are widely used in Australian overseas furniture, its smooth surface makes it easy to dye, clean, color, spray and all forms of inlay and cover. The user is provided with the advantages of natural fibers, with the strength and properties of the wood, while also avoiding the thrift and other defects of the wood (cracking, water swelling rate, etc.). Australian pine board is widely used in decoration, furniture, construction, packaging and other industries. Its hardness is large, suitable for wardrobes, bookcases will not be deformed (even floor), load-bearing, fireproof and moisture-proof performance is better than traditional large core board, material is very Environmental protection.
Disadvantages: It is not easy to eat ordinary nails, mainly because foreign wood processing mostly uses screws instead of big nails. This is for easy disassembly. It will not damage the board after disassembly, and the value of reuse is high (the traditional large core board is hammered into the hammer). After being removed, it is basically scrapped), so from this point of view, it cannot be said that the Australian pine board does not eat nails. In fact, it has a good effect on the nails of the screws, but the performance of the nails for the hammers general. Therefore, it is recommended to install more screws, which is much better than hammer and nail. In addition, there are many cases of crusting and unevenness of the plate. Small holes and small pits are prone to ash accumulation in the north, so it is recommended that the workers approve the colored ash (for exaggerated plates) before painting. Transparent putty on several occasions (for fine pitted plates).
Overall, this board is also more expensive, but it is environmentally friendly, and it is worthwhile as a furniture material for health. The small disadvantages have obvious advantages over the traditional large core boards, so pay attention to the process when using them.
04, Hexiang board, aldehyde-free board, original version
Hexiang board is made of crop straw and straw as the main raw material. It is made of MDI glue and functional additive. It is made of high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has good dimensional stability and high strength. Environmentally friendly, flame retardant and weather resistant, it also has excellent processing properties and surface decoration properties.
The aldehyde-free board and the original state board are both a concept of the fragrant board, basically the crop straw, adding MDI glue, emphasizing no formaldehyde.
Advantages and Disadvantages: One advantage of these three plates is that they are added without aldehydes because of the glue used in MDI glue. In contrast to urea-formaldehyde gels for particle boards and the like.
The straw used is destined to be stable without the strength of the particle board (solid wood particles). It is used as a side panel of the wardrobe. After a long time, the possibility of bending will occur, and the serious point will break. (personal opinion)
I heard that these plates do not release formaldehyde, but it is possible to release amines, benzene, etc., so the consumer has to distinguish.
05, North American solid wood, Australian solid wood
The core is made of high-quality imported dried coniferous tree with more than 60 years of splicing. The two sides are made of reinforced eucalyptus veneer as the balance structure, and then the advanced automatic UV paint technology is selected for the selected solid wood skin. (Australian solid wood is not painted, just melamine Veneer), the topcoat is hard and wearable, and the surface is bright. The two woods only emphasize the different sources, the materials are basically the same, and the other is the surface treatment, whether it is melamine veneer or paint processing.
Advantages and Disadvantages:
1, solid wood products, processing again, put an end to the easy deformation and cracking of solid wood.
2, North American solid wood used in the wardrobe door panel technology is relatively stable. Other brands are used on the cabinet board.
3, environmental protection can reach E0 level.
06, negative ion plate
The negative ion plate is a fourth-generation plate processed by nano-tech on a melamine veneer with a layer of positive and negative electrodes (called anion catalyst). As long as the humidity in the air is not zero, it will continue to transform. It is a negative ion, which forms a permanent negative ion emission function and does not produce harmful substances and causes other side effects.
Advantages and Disadvantages:
1. The product itself reaches the E0 level environmental protection.
2, negative ion plate can release negative ions continuously in 15 years, to purify the harmful gases in the air, smoke, dust, virus bacteria, microorganisms, haze, PM2.5 and so on.
Negative ions can effectively decompose harmful pollutants such as formaldehyde and benzene. By comparison test, the formaldehyde concentration can be reduced by 30% within 24 hours. In the current environment of serious indoor decoration pollution, there is a great market demand.
3, load-bearing, wear resistance (wearing resistance reached more than 9,000) and particle board similar.
This article will share with you the nine most common types of consumers: EGGER board, Ou Song board, Australian pine board, Hexiang board, aldehyde-free board, original board, North American solid wood, Australian solid wood and negative ion board.
01, EGGER board
The EGGER board is an artificial board produced by the Austrian EGGER Group (founded in 1961) by FRITZ EGGER GMBH Co. in 17 factories in Europe. It is a kind of particle board, which is selected from coniferous trees grown in the frigid zone of the European continent (mainly Pine).
Advantages and disadvantages: Since the glue used is urea-formaldehyde resin glue, the environmental protection of cheap plates and good plates is very different. There are only those that meet the national standard E1 level ≤1.5mg/L, and also have environmental protection European standard E0 formaldehyde emission ≤0.5mg /L.
EGGER board is imported sheet, mainly three agents (Shanghai, Beijing, Guangzhou), no domestic board. Since the surface substrate is covered with a special impregnated surface layer with anti-scouring and acid and alkali resistance, it is more resistant to scratch than the general particle board, and the wear resistance number reaches 9000 or more. The environmental protection is relatively high, and all reach the E0 level.
02/Ou Song board
The scientific name of "Ou Song Ban" is OSB oriented structural particle board. It is made of small diameter material, thinned wood and wood core. It is processed into 40-100mm long, 5-20mm wide and 0.3-0.7mm thick by special equipment. A sheet of oriented structure made by de-oiling, drying, sizing, directional paving, hot forming, and the like.
Advantages and Disadvantages: Environmental protection is the most concerned issue for everyone. Many people think that particle board glue is more, and there is less glue on the large core board and finger joint board, so the particle board is not good, but the glue is also good or bad. Ou Song board is made of formaldehyde-free glue and is processed locally in Germany. It meets the highest environmental standard EN300 in Europe. It is the highest grade decoration material on the market and is a true green building material.
1. No deformation, high hardness and high strength. This is very important. I believe that many people have been harmed by inferior board furniture. The furniture that has just been used for less than a year has begun to deform, which gives us the impression that the panel furniture has poor quality and is not durable. Ou Song board is used as a building material, and its strength is naturally needless to say.
2, you can directly brush the oil on the surface to achieve a natural style, more suitable for "landscape and other design style."
3, waterproof and moisture-proof ability, some northern solid wood furniture shipped to the south to sell, the sample can not be opened to the drawer, and the furniture made of Ou Song board does not have to worry about this problem.
4, strong nail holding power
5, saving wood, you can use wood processing scraps efficiently.
6. It is easier to process, has excellent bending strength, excellent plasticity and processability, and can be made into any shape.
03, Australian pine board
The name of the Australian pine board and the Osong board sounds a lot like it. Are they the same? In fact, these two are completely different varieties, and the various characteristics are different, even different.
Australian pine board, which is an imported medium-density board, and the core material is pine wood, which is made by sizing and pressing wood fiber. The Australian pine board inherits the characteristics of the MDF, has high hardness and is not easy to be deformed, and the floor performance is better than the traditional large core board.
Advantages and Disadvantages: Australian pine board is an ideal wood product made by combining natural and human creativity. The thickness is usually 2.5mm-50mm. It has a well-balanced structure with smooth edges and excellent mechanical properties. Its strength and stability are widely used in Australian overseas furniture, its smooth surface makes it easy to dye, clean, color, spray and all forms of inlay and cover. The user is provided with the advantages of natural fibers, with the strength and properties of the wood, while also avoiding the thrift and other defects of the wood (cracking, water swelling rate, etc.). Australian pine board is widely used in decoration, furniture, construction, packaging and other industries. Its hardness is large, suitable for wardrobes, bookcases will not be deformed (even floor), load-bearing, fireproof and moisture-proof performance is better than traditional large core board, material is very Environmental protection.
Disadvantages: It is not easy to eat ordinary nails, mainly because foreign wood processing mostly uses screws instead of big nails. This is for easy disassembly. It will not damage the board after disassembly, and the value of reuse is high (the traditional large core board is hammered into the hammer). After being removed, it is basically scrapped), so from this point of view, it cannot be said that the Australian pine board does not eat nails. In fact, it has a good effect on the nails of the screws, but the performance of the nails for the hammers general. Therefore, it is recommended to install more screws, which is much better than hammer and nail. In addition, there are many cases of crusting and unevenness of the plate. Small holes and small pits are prone to ash accumulation in the north, so it is recommended that the workers approve the colored ash (for exaggerated plates) before painting. Transparent putty on several occasions (for fine pitted plates).
Overall, this board is also more expensive, but it is environmentally friendly, and it is worthwhile as a furniture material for health. The small disadvantages have obvious advantages over the traditional large core boards, so pay attention to the process when using them.
04, Hexiang board, aldehyde-free board, original version
Hexiang board is made of crop straw and straw as the main raw material. It is made of MDI glue and functional additive. It is made of high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has good dimensional stability and high strength. Environmentally friendly, flame retardant and weather resistant, it also has excellent processing properties and surface decoration properties.
The aldehyde-free board and the original state board are both a concept of the fragrant board, basically the crop straw, adding MDI glue, emphasizing no formaldehyde.
Advantages and Disadvantages: One advantage of these three plates is that they are added without aldehydes because of the glue used in MDI glue. In contrast to urea-formaldehyde gels for particle boards and the like.
The straw used is destined to be stable without the strength of the particle board (solid wood particles). It is used as a side panel of the wardrobe. After a long time, the possibility of bending will occur, and the serious point will break. (personal opinion)
I heard that these plates do not release formaldehyde, but it is possible to release amines, benzene, etc., so the consumer has to distinguish.
05, North American solid wood, Australian solid wood
The core is made of high-quality imported dried coniferous tree with more than 60 years of splicing. The two sides are made of reinforced eucalyptus veneer as the balance structure, and then the advanced automatic UV paint technology is selected for the selected solid wood skin. (Australian solid wood is not painted, just melamine Veneer), the topcoat is hard and wearable, and the surface is bright. The two woods only emphasize the different sources, the materials are basically the same, and the other is the surface treatment, whether it is melamine veneer or paint processing.
Advantages and Disadvantages:
1, solid wood products, processing again, put an end to the easy deformation and cracking of solid wood.
2, North American solid wood used in the wardrobe door panel technology is relatively stable. Other brands are used on the cabinet board.
3, environmental protection can reach E0 level.
06, negative ion plate
The negative ion plate is a fourth-generation plate processed by nano-tech on a melamine veneer with a layer of positive and negative electrodes (called anion catalyst). As long as the humidity in the air is not zero, it will continue to transform. It is a negative ion, which forms a permanent negative ion emission function and does not produce harmful substances and causes other side effects.
Advantages and Disadvantages:
1. The product itself reaches the E0 level environmental protection.
2, negative ion plate can release negative ions continuously in 15 years, to purify the harmful gases in the air, smoke, dust, virus bacteria, microorganisms, haze, PM2.5 and so on.
Negative ions can effectively decompose harmful pollutants such as formaldehyde and benzene. By comparison test, the formaldehyde concentration can be reduced by 30% within 24 hours. In the current environment of serious indoor decoration pollution, there is a great market demand.
3, load-bearing, wear resistance (wearing resistance reached more than 9,000) and particle board similar.
The Patient Bed is designed according to the patient's treatment needs and bed-ridden living habits, and is designed with family members to accompany it, with multiple nursing functions and operating buttons, and an insulated and safe bed. Patient bed is convenient for medical observation and inspection and operation of family members. It can also be used for healthy people, severely disabled, elderly, urinary incontinence, brain trauma patients in stable or convalescent treatment at home, mainly for practicality.
There are many different types of patient beds. Electric patient beds are the most commonly used and most popular. These are electric patient beds that have buttons on the side rails and these are able to raise and lower the bed to different positions.
Electric Patient Bed,Multifunction Patient Bed,Motorized Hospital Bed,Electric Adjustable Patient Bed
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalsupplier.com