Climbing the vertical ice wall requires strength, technology, and courage. The climber must be confident in himself and firmly believe that he can conquer the route he wants to climb.
Every climb must be clear. Climbing the ice wall is a technically complicated and dangerous sport. Especially if the first person in the vanguard climbs off, it will be very dangerous. Therefore, when climbing the ice wall, you must choose the ice wall that suits your level. It should not exceed its own level. The way to increase the level of climbing the ice wall is to use the above protection and strengthening exercises to make you master the technology and improve it.
When climbing ice, keeping the balance of the body and evenly exerting force can reduce the fear of the climber. When climbing, we must master the rhythm of climbing and the understanding of the status of the ice wall. This movement requires the climber to be fully prepared for the climb. If he is hesitant about pioneering the climb, it is best to temporarily abandon it.
When climbing ice, the location of the hailstone should not be too high. If you feel that all the power under your feet is on the tip of the toe, it means that the position of the hailstone is high. This can easily cause the crampons to stagger in the ice before they step on. The contact between the crampons and the ice wall should be 90 degrees, with the heel slightly down.
When the climbing wall is of good quality and thick, it can be climbed using the force method. The point is to swing the hailstones behind their shoulders and forcefully pry the tip into the ice. The benefit of this kind of climbing is to save energy in other parts of the body through inertia and chest muscles. The point of this kind of technology is that the tip of the ice pick must break vertically into the ice wall, and the power should be concentrated at one point.
When the climbing ice wall is thin, a small hole can be made by tapping the ice wall with a pointed tip of the ice pick, and then the tip of the ice pick can be hung into the hole, remembering that the hail can't rush forward. When the foot reaches this height, one of the cramp nails can be placed in the hole, which is both effortless and strong.
The normal operating procedure is to double-entry the ice wall and then repeat the same action. Some climbers are more willing to dig their ice into the ice wall while moving their feet after choosing ice. Although this kind of climbing is a bit risky, in fact, this kind of climbing is the most stable. Do not be afraid to take risks. When you learn this method of climbing, you will feel that it is so effortless and easy. The position of the foot should not be too high when climbing, and the position of the climber in a too high position will be semi-shaped, which will make it difficult to pick up the hailstone. In the climb, it is also required that the waist should not exceed the height of the hailstone. Place the hailstone on the hailstone or the top of the hail in the appropriate place. When you pick up the hailstones, you should move the hailstone vertically. Remove it after loosening. When you pick up a hail you can't twist back and forth in the ice. This may cause hail to break in the ice.
When climbing, look for places that are uneven on the ice, so that climbers can easily relax the ice and crampons.
If someone has climbed the same route before, it is best to use the place where the climber used to put hailstones and crampons. This will save a lot of energy.
It is difficult to find a suitable place to rest when climbing ice. The best place is a chimney-shaped semi-circular terrain. You can step out your feet and put your weight on your lap to rest. The upper limbs only play a role at this time. Hail keeps the body balanced. Another type of rest is monkey hanging, that is, after the break into the hail, straighten your arms, place your weight on your feet, and raise your feet to make your body curved. The height of the two hailstones was the same. The front teeth of the left foot kicked into the ice wall. The height of the right foot was raised in line with the height of the waist. The whole foot touched the ice wall. At this time, the right foot and the right leg were resting and then the legs alternated. But do not rest too long in one place to avoid freezing.
The setting of protection points during ice climbing should take into account the quality of the ice surface, the proper standing position, and the appropriate distance. The placement of an ice picker on a vertical ice wall is a difficult task and must be mastered by ice climbers. The distance between general protection points cannot exceed 6 meters, otherwise it is no different from climbing without protection.
There are three ways climbers can place ice cones on the ice wall:
1. A hailstone dipped into the ice first, holding the handlebar, and stepping firmly under the foot to straighten the body. The other hand cuts a hole into a cone of ice with a hail, and then hammers in or spins in. For safety reasons, the hail hanging on the ice wall is best connected to the safety belt;
2. After an ice breaks into the ice, make the hailstone wristband slightly higher than the shoulder. Put one arm into the wristband to the elbow, and then place the icecone on both hands;
3. Two ice skimmers are connected to the seat belts on the ice and put ice cones on both hands.
Icicle climbing is more challenging and more exciting; unprotected climbing is the way many masters like to climb ice. The climbers need not only have superb skills and physical strength, but also have good physical distribution and make full use of various terrains to rest and Relax but none of the beginners can touch.
Pet Hair Remover is necessary for every pet family. Especially in the hair changing period of pets, every place in the family will be stained with hair. If it is stained with clothes, it will also be stained with other clothes when cleaning.
Because of this, various pet hair removers have appeared.
1. Hair remover for pets
That is to brush the pet's hair with a comb, which can brush down the floating hair on the pet, and it is convenient to collect and deal with it, so as to avoid the hair flying everywhere. This is also a solution to the problem from the root.
2. Pet Hair Remover For Furniture and clothes
It is used to brush, or stain the hair on furniture and clothes. Even if you brush your pet, you can't avoid getting stained. You can use this at that time.
3. Pet Hair Remover For Laundry
When washing clothes, it can be put into the washing machine to collect the hair on the clothes. It avoids the wool from touching other clothes and is convenient for collection and processing.
All kinds of pet hair removers can meet your needs, solve your problems caused by pet hair, and return you a hairless home.
Pet Hair Remover,Pet Hair Remover Roller,Pet Hair Remover For Laundry,Pet Hair Remover Washing Machine
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycypets.com