The eight traps of ballpoint pens and gel pens should be based on honesty. However, due to the fierce competition in the industry, especially the cruelty of writing stationery competition, many production or dealers have to save costs, cut corners, and reduce costs in order to survive. The price is fighting for the market. As a result, the quality of the ballpoint pen and the gel pen is inferior. In Yiwu International Trade City, the price of a ballpoint pen is as low as 0.028 yuan; the price of a neutral pen is as low as 0.10 yuan; some friends who have just entered the line are difficult to learn because of lack of experience. Identify the pros and cons of the product, especially the high-tech pen technology, and there is no national standard to follow, often buy some inferior products and can not return, thus causing economic losses. I have suffered a lot. I have learned the lessons and listed the eight traps of ballpoint pens and gel pens. I would like to ask my friends not to take a long-term view when purchasing. I also hope that my friends will enlighten me and share valuable experience.
Trap 1: Many opaque ball-point refills do not fill the amount of ink according to the requirements of GB/T4306-92 (national standard), only 1-2 cm near the tip of the pen; some transparent ball refills are close to 1 cm of the tip of the pen It is an ink that can be written, and the rest can't be written.
Trap 2: Inferior inks can't be used in the ambient temperature range required by the national standard of 0-40 degrees C. If the weather is hot, it will flow; if the weather is cold, it can't be written.
Trap 3: The ball-end pen has a shelf life of two years, and the inferior ink has dried up in a few months.
Trap 4: The standard writing angle of the ballpoint pen is 47 degrees. The inferior pen tip or inferior ink can only be written when it is vertical. It is difficult to write or write it when the pen is slightly tilted (to hold the pen at a 47 degree angle) , counterclockwise, fast circle is a good way to intuition test ballpoint pen).
Trap 5: The ballpoint pen and the gel pen are made of plastic. The cap of the inferior product is easy to slip, the pen and the pen cover are not in contact with the bayonet, and the glue is not bonded. The tension of the plastic itself is contacted. It is easy to fall off; it is also easy to top off when the tail plug is written hard. The production lines of these factories are almost all paid by piece. Even if there is a quality system, the inspection of the process and the end of the process will not be carried out, and the quality system will be ineffective.
Trap 6: The gel pen is an emerging product. There is no national standard at present. Due to the immature technology and production process, ink condensation, coarsening and crystallization are prone to occur. Many manufacturers do not know how to work hard, especially the nominal 0.5mm or 0.38mm needle gel pen, most products will not be written after 3-5 months.
Trap Seven: Inferior ink not only does not write smoothly or can not write, but also there is the phenomenon of spitting ink or water seepage, often there is no problem when looking at the sample, but the goods are not right after the payment, there are many problems. (Gently draw a straight line at the same pen angle as the ballpoint pen, the line of good products is continuous, not thick and thin, and the color depth is consistent; then draw the fold line slowly with the same pen angle according to the general writing pressure. The product line does not accumulate ink (water seepage), when the writing is slow, there is no ink accumulation point, not thick and thin, the color depth is consistent; then the same pen angle is counterclockwise, fast circle, good product feels smooth Smooth)
Trap eight: Inferior gel pens in addition to the problem of ink, there are also inferior materials used in the ball, the inner cavity of the pen tip is rough, the tail plug oil can not follow, the sealing edge of the pen tip is elastic and the seal is not good, etc. There will be problems during storage for a long time or during transportation or use. Shopping malls such as battlefields, there are traps everywhere, Mo Dao is a gentleman's heart to the villain's belly, I hope friends in the purchase of writing stationery, how long a heart, so that "parallel imports" and unscrupulous profiteers go to hell soon! Thank you!
Leveling Foots
The main products are bakelite parts, Injection molded part, casting iron parts, zinc plated parts and other mechanical accessories.
Now our company has established a high reputation for providing good quality products at competitive prices. We have been paying attention to advanced management, professional working teams and integrated production facilities.
As a result of high quality products and outstanding service, we have gain a global sales network reaching Australia, Russia, Japan, the UK, Germany, America and so on. Many customers give us good evaluation.We have established long-term business relationships with many domestically famous companies
Leveling Foots,Leveling Feet,Nylon Leveling Feet,Adjustable Leveling Feet
Hebei Baisite Machinery Accessories Co.,Ltd , https://www.jiaomujian.com