High and low temperature damp heat test chambers and constant temperature and humidity test chambers are all outstanding equipments belonging to the test chambers. They are not called the same method. They are suitable for use in electronics, instrumentation, and automotive parts. The test product, in many cases when testing the test product, the inner wall test through the observation window will be confused by the water mist, and everyone will worry about where the water mist comes from, will it not? A series of problems such as damage to the test box and water mist caused by what reason, the following Shanghai Lin frequency Xiaobian to brief you on the cause of the water mist and whether he will cause damage to the equipment.
The first is the cause of water mist. According to the test standard of high and low temperature damp heat test chamber, it can be 20-98% in different humidity. If you want to do humidity, you must have a humidification system. This is not difficult to understand. If you buy a humidifier, and the humidity is less than 50%, the situation will not produce water mist. It is because the humidity is not big enough. When it is greater than 50%, especially the high humidity test experiment within 85%. In the room, it is inevitable that water mist will occur, so you don't have to be too nervous.
During the test, the test product will not be affected. It depends on whether the test chamber is in compliance with the humidity test. It is said that the high-low temperature damp heat test box uses the principle material of mirror stainless steel and the SUS304 mirror panel and 304 stainless steel material. , has a very strong resistance to corrosion and heat, so as long as it is a high humidity test will not have much impact.
Aluminum Dish Rack,Aluminum Dish Rack With Remove Set,Aluminum Dish Drying Rack For Kitchen,Singer Layer Aluminum Dish Rack
Jiangmen Xinhui Siqian Xiangyi Metalwork Factory , https://www.xydryingrack.com