Trees and bamboo are the first decoration materials used by people. In ancient times, wood was used for furniture and beams. Although new materials have appeared, wood still occupies a certain position, and perhaps there is also a nostalgic complex. The following is a brief introduction to the selection points of decorative wood and the classification of decorative wood.
The main points of purchase of decorative wood
1. Plywood depends on whether it is an authentic product
Most manufacturers sell domestic plates as fake entrance plates and low-grade plates as high-grade plates. When buying a board, the user must first recognize the trademark, site, grade and anti-counterfeit mark on the whole package. When it is true, then look at the quality. There are many burrs around the poor board, and the authentic board is neat and smooth, and the sandwich is well-proportioned and dense. Smooth and consistent, with few knots and patches. Particleboard, medium density board and sapele board also have a variety of thicknesses and grades, and prices vary widely. A good plate is not only thick but also compact in density, and is not easily expanded and deformed in water.
2. The raw wood depends on whether the quality is reliable
In the current market, especially in rural markets, counterfeit logs are flooding. The means can be described as varied. Some sell cedar from Jiangxi and Hunan as Guizhou pine, and Pinus sylvestris as red hemlock as Douglas fir, etc .; The ruler poses as a ruler. When buying, consumers should lift the hijab of the "fake foreign devil", see through the face of "selling sheep meat to sell dog meat", and then buy after confirming that the goods are genuine. The finished wood should be high-quality wood after drying treatment, without bending deformation, no breakage and decay, small wood grain slope, no resin marks, white spots and honeycomb eyes, and small and few nodes.
3. The semi-finished wood material depends on whether the materials are consistent
Some unscrupulous manufacturers take advantage of people who prefer to buy semi-finished wood products that are not painted, doped with fakes, use good materials on the surface, use poor materials on the back and interlayer, and even let you see that the samples are good goods, and paying for the goods is bad. This is more common on wooden floors, wooden doors (windows and doors related to doors and windows), wooden wall skirts, wooden lines, grilles, etc. When purchasing this kind of goods, users must check carefully, not only to be consistent inside and outside, but also the outer surface layer and the inner core, especially the bundle of lines and floor, to prevent short materials and poor materials in the middle. Doors and windows need to be processed with fine joints and firm joints. Tenon joints should be used more and nails should be used less. The angle of the thin plate is the covered wire of the door or the solid wood. The cross section of the wood is not exposed, and the covered wood cannot be seen.
Classification of decorative wood
1. Soft materials
Soft wood is one of the most common types of wood in daily life. Except for individual varieties, soft wood is mostly a structural material commonly used in construction and decoration. Soft wood characteristics: The overall characteristics are lighter materials, relatively greater structural strength, stronger bending resistance, and better corrosion resistance, but most woods have unsatisfactory patterns and wood colors, and some tree species have a lighter volume, Therefore, the load carrying capacity is poor. Main species: pine, fir, poplar, willow, linden, colored wood, birch.
2. Hard materials
Hard and miscellaneous materials are mostly decorative materials, which are the main furniture materials for mid-range decoration and important decorative materials for decoration. The most important feature of hard materials is that most woods have beautiful patterns and colors, and the weight of the materials is moderate and not easy to deform. The hard and hard materials mainly include catalpa, catalpa, palm elm, yellow pineapple and ash.
3. Precious hardwood
There are few sources of precious hardwood, and the price is relatively expensive. The main features are larger bulk density, harder materials, better structural strength, and can withstand heavier loads. Most of the patterns are very beautiful and the texture is delicate. It is a high-end decorative material for high-end furniture and interior decoration, and has strong durability Sex and corrosion resistance, material color is also ideal. The main tree species are: Pearwood, Rosewood, Redwood, Beech, Phoebe, Camphor.
4. Imported wood
Imported wood is quite expensive, and relatively few decorative materials and structural materials are mainly: mahogany, eucalyptus, teak, oak, etc.
Editor's summary: The relevant information about the purchase points of decorative wood and the classification of decorative wood is introduced here for everyone. I hope this article will be helpful to everyone. If you still do n’t understand something, you can leave a comment below, we will answer it as soon as possible.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Which kind of wood is good for solid wood sofas? Which kind of wood is good?
Joybabies Baby Carrier offer multiple carrying positions for versatility, durability, fit and ease of use. You can carry your children with the best baby carrier in front facing out, facing in, back carry position.All-season Baby Carriers are becoming more and more popular as regular items for babies and parents.
Baby Waist Carrier,All Seasons Baby Carrier,Baby Front Carrier,Carrier For Baby
JOYBABIES PRODUCT CO.,LTD. , https://www.my-joybabies.com