How to bond plastic pipe fittings

How to bond plastic pipes and fittings? Summarize the following methods.

1. Before the pipes and fittings are bonded, use a dry cloth to wipe the socket side and the outside of the socket. When the surface is oily, wipe with acetone.

2. Pipe section should be flat, vertical pipe axis and chamfering; before the bonding should be drawn and marked the insertion line, try plug depth can only be inserted to the original depth of 1/3 ~ 1/2, When the gap is too large, do not use adhesive methods.

3. When applying the adhesive, apply the inner side of the socket first, and then apply the outer side of the socket. When applying the socket, apply evenly from the inside out along the axial direction. Do not paint or smear excessive (200g/m2).

4. After applying the adhesive, it is advisable to keep the applied external force unchanged within 1 minute to maintain the straightness and position of the interface.

5. Wipe the excess adhesive that has been squeezed out in time after bonding, and do not apply force or force loading during the curing time.

6. Adhesive joints shall not be constructed in rain or water, and must not be operated below 5°C.

7. Connection procedure: Prepare → clean the working surface → try plugging → brush adhesive → bonding → curing.