[ Chinese wardrobe net ] Wardrobe is an important part of home living furniture, and it is one of the big parts that make up bedroom furniture. Therefore, the quality of cabinets directly affects the living of bedroom furniture. According to market research and analysis, the most dissatisfied consumers are the warping deformation of the cabinet door. Senior plate expert analysis, in addition to material and design reasons, the adverse effects of the processing process is the main cause of high cabinet long door bending deformation:
First, the parts are stacked to cause deformation.
In the production, some operators are convenient for the drawing, the plates are stacked at random, or the plates of the stacked plates are not flat, and even the plates are inclined against the wall, so that the plates are before entering the next process. It has been deformed by its own weight.
Second, the finishing process causes deformation.
During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes.
Third, the effect of finishing putty.
In the process of painting the door parts, many manufacturers use pig's blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density fiberboard and particleboard The hygroscopicity is particularly strong, so when one side of the door panel member is not put with putty and the other side is coated with such a water-rich putty, the door panel member is hygroscopic and deformed.
In view of the above, in the cabinet, the following two aspects of control should be strengthened during the cabinet making process.
During the production process:
1. When pressing the tri-ammonia board, it should be piled up with iron trays, after 5-7 days of maintenance, and then passed the quality inspection, stacked on the wooden pallet and sent to the workshop for processing.
2. During the process, pay attention to stacking and smoothing on the assembly line.
3, the glass door and decorative panel door should be hard material edging, which not only can play a certain degree of decoration and embellishment, but also can well correct the deformation of the door components.
In daily use:
1. The moisture content of wood should be controlled at about 15%. In the south, the air humidity in this area is relatively high, and should be controlled at about 12%. In the north and relatively dry areas, it should generally be no less than 8%. To avoid the impact.
2. The purpose of the paint brush is to protect the wood from the erosion of the external environment. Therefore, the upper and lower crowns of the inside and outside of the wardrobe door and the door have paint, such as a sticker surface, which should also be adhered to.
3. The material used to make the door panel should use blockboard, sandwich panels, such as wood, should avoid the use of deformable wood (such as ash) and parts (such as log edges).
Garden border fence is very commercial wire fence for garden using, due to its shape and large mesh, this kind of wire mesh is mainly used as a decorative wire, especially round borders. With its high quality galvanized wire inside and green PVC coating outside, make it long life time and UV protected.
Features
Green & Arch Border Top
ŸGalvanized core, plastic coated
ŸRust and rot resistant
ŸEasy to install
Decorative fence for garden border or flower gratings.
Garden Green Border Fence,400mm Garden Fence Mesh,Strong Garden Border Fence,Garden Border Fence
DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , https://www.wiremeshsolution.com