Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand anaerobic incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
Instructions for use Operating room anaerobic environment formation
1) Place the necessary accessories and appliances according to the requirements of use, and put two five-toxic plastic bags into the operating room.
2) Adjust the input pressure of the mixed gas cylinder and nitrogen cylinder, adjust the pressure reducing valve to make the input pressure 0.1Mpa
3) After the device is turned on, after the power switch is turned on, press the main power button on the control card to power on the device.
4) Put 1000g of palladium particles (sealed) and 500g of desiccant in the operation room, and put the Meilan indicator strip.
5) Close the indoor and outdoor doors of the sampling, and vacuum check. (Press the vacuum pump key on the control panel, press once, then press off)
6) The first replacement in the operating room (nitrogen replacement): (1) First insert the rubber tube into the air inlet of the operating room, and the other into the plastic bag. (2) Connect the nitrogen gas inlet, open the nitrogen control valve in the operation room, and make the two plastic bags full of nitrogen, then close the solenoid valve, and then tighten the bag mouth. (3) Put the latex glove on the flange ring of the observation board and tighten it tightly. (4) Gradually put the nitrogen in the plastic bag in the operating room until it is completely eliminated
7) The second replacement of the operation room (nitrogen replacement) repeats the nitrogen flushing process. The sampling room is evacuated first, and pay attention to close the exhaust at any time by pressing the exhaust valve. 8) The third replacement of the operation room (mixed gas replacement) (mixed gas ratio is H2 1/85% H2 1/10% H2 1/10% CO2 / 15%) (1) Change the gas path and open the operation room mixture When the valve is inhaled, the sampling chamber is first evacuated when flushing, and pay attention to close the exhaust by pressing the exhaust valve at any time. (2) After the mixed gas is filled in the plastic bag, close the solenoid valve and open the mixed gas restrictor valve, so that the mixed gas passes through the flow stabilizer, flowmeter, and adjust the flowmeter, and the flow rate is about 10 ml per minute. (3) The mixed gas in the plastic bag is gradually discharged into the operating room. (4) After three times of ventilation, the oxygen content of the gas in the operating room is already in the extreme state
9) Turn on the palladium particle deaerator in the operating room, connect the power of the deaerator catalyst for catalytic deaeration, and drip a little clean water on the reaction area of ​​the anaerobic indicator bar. After 1-2 hours, observe the discoloration and the reaction part Dark blue changes to light blue to achieve an anaerobic environment in the operating room.
Note: 1 The indicator strip can be used repeatedly, 2 Do not touch the blue reaction area 3 Pack the spring in the sealed tube, prevent it from being in a dry place. 10Ultraviolet sterilization lamp, sterilization treatment in the room, the sterilization time is customized.
Shanghai Haozhuang Instrument Co., Ltd. is a technologically innovative high-tech enterprise based in Shanghai and radiating the whole country. The company has first-class technical personnel and a good team of technicians, with advanced technology and strong development strength. Since the establishment of the company, the products and The service is recognized by customers and has a good reputation. The company adheres to the business philosophy of "integrity. Professionalism. Innovation. Growth" to provide customers with elaborate services. The company's main business and production scope include: testing equipment, laboratory equipment, cleaning equipment, Environmental protection equipment and undertake the design and customization of non-standard products and provide related technical services.
Snap Slim Light Box
FAQ
Q: Are you a trading company or factory?
A: We are factory.
Q: What is the MOQ?
A: No MOQ required normally, that means you can always ask for a sample first. But remember the sample freight is at your own cost.
Q: Do I have to have a design to inquire?
A: Yes! A well made design/artwork is the most helpful thing to get an exact quote. However, if you really do not have a design...just let us know your idea, we'll cover it.
Backlit Poster Holder,Beer Light Box,Advertising Light Box,Snap Slim Light Box
Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com