Santana 2000GSI Electronically Controlled Gasoline Engine Disassembly and Installation Training Platform

Santana 2000GSI Electronically Controlled Gasoline Engine Disassembly and Installation Training Platform

1. Basic instructions:

The new Santana 2000GSI gasoline engine is used as the basis, which is composed of a disassembly and assembly flip platform and a running platform. The disassembly and assembly flip platform provides students with practical training for engine disassembly and assembly. The engine can be started to check the assembly effect of the engine.

Second, the configuration requirements:

The new Santana 2000GSI gasoline engine assembly is equipped with all relevant auxiliary control systems, all sensors and actuators are complete and effective, and the engine runs normally.

The whole training platform is composed of two parts: disassembly and assembly, overturning platform and running platform.

1. Disassembly and assembly of flip stand

(1) It is composed of a turbine scroll mechanism, which can be turned 360 degrees and can be locked at any position;

(2) Equipped with a large area oil pan to ensure the cleanliness of the work area;

(3) With mobile casters and caster self-locking device.

2. Running stand

(1) The console consists of the engine electronic control unit, original wiring harness, ignition switch, combination instrument, OBD-II diagnostic seat, fuel tank, battery, etc .;

(2) External detection terminal;

(3) Equipped with circuit board and terminal voltage measurement points.

3. Equipped with instruction manual and training instruction book.

3. Functional requirements:

The training platform should be able to fully display the structure and working principle of the automobile engine, and can meet the practical training teaching and assessment needs of engine disassembly and assembly and inspection. It is easy to operate, safe and reliable.

1. Engine test training platform function:

(1) It can ensure the normal operation of the engine, and can fully demonstrate the composition structure and working process of the EFI gasoline engine. It is suitable for various engine operating conditions experiments to check the effect of engine assembly;

(2) The combination meter can display various dynamic and static parameters of the engine in real time;

(3) External detection terminal can directly measure the resistance, voltage, frequency and other signals of computer pins, various sensors and actuators on the panel;

(4) Equipped with OBD-II diagnostic seat, you can use special instruments to read fault codes, eliminate fault codes, read data streams, waveforms and other detection and diagnosis work;

(7) Equipped with circuit structure and schematic diagram, which is convenient for teaching the engine electronic control system with reference to the actual object.

2. Engine disassembly and assembly training bench function:

(1) Separate disassembly and assembly of the flip stand and running stand, the engine is mounted on the flip stand, which is convenient for various experiments of the engine when assembled, and the practice of disassembly and assembly when decomposed;

(2) It has large disassembly and assembly operation space and stability.

4. Process requirements:

1. The control panel drawing is made of sandblasted aluminum plate, which will never fade;

2. The steel frame structure is seamlessly welded, and the metal surface is sprayed with high temperature.

5. Dimensional parameters:

Flip frame size: 1000mm X 800mm X 800mm (length X width X height)

Console size: 1000mm X 600mm X 900mm (length X width X height)