General technical conditions for comprehensive performance testing of automobiles GB / T 17993-1999
-------------------------------------------------- -------------------------------------------------- -------------
1 Scope
This standard stipulates the testing items of the automobile comprehensive performance testing station and the conditions for the use of equipment personnel and management systems.
This standard is applicable to the approval and inspection of the opening of a comprehensive vehicle performance testing station.
2 Reference standards
The provisions included in the following standards are cited by this standard to form the provisions of this standard. The editions shown at the time of publication of this standard are valid and all standards will be revised. All parties using this standard should discuss the possibility of the latest edition of the following standards.
GB 7258—1997 Motor vehicle operation safety technical standard
GB50033—1991 Lighting design standard for industrial enterprises
GB50034—1992 Industrial enterprise lighting design standard
GBJ 16—1987 Fire protection code for building design
GB 50055—1993 Industrial and civilian general equipment electrical equipment design code
GB 50057—1994 Design Specification for Lightning Protection of Buildings
TJ 36—1979 Hygienic design standard for industrial enterprises
3 Definition
This standard uses the following definition.
Automobile Comprehensive Performance Testing Station
Institutions engaged in the detection of various types of automotive performance, safety, economy, reliability, and performance of noise and pollution emissions.
4 Classification
The classification of automobile comprehensive performance testing stations is as follows:
a) Class A station
Automobile comprehensive performance testing station that can undertake automobile technical status testing, vehicle technical level assessment testing, maintenance quality testing and accept the commission of relevant departments to test automobiles and related projects.
b) Class B station
Automobile comprehensive performance testing station that can undertake automobile technical condition testing and maintenance quality testing.
5 Test items and equipment conditions
5.1 The test items and equipment requirements undertaken by Class A and Class B stations are shown in Table 1.
5.3 If a computer system is used in the automobile comprehensive performance testing station, the following requirements shall be met:
a) After adopting the computer system, it should not affect the functions of the original testing equipment;
b) After the computer system is adopted, the indication error of the system should not be lower than the accuracy requirements of the original testing equipment;
c) When the computer, its ancillary equipment, and interfaces fail, the original testing equipment should be able to work normally.
6 Personnel conditions
6.1 Stations at all levels should be equipped with station owners, technical leaders, quality managers and full-time inspectors.
6.2 The person in charge of technology and the person in charge of quality shall have the technical title of intermediate or above (including intermediate) of the corresponding professional.
6.3 All testing personnel must be specially trained, evaluated and obtained job qualification certificates.
7 Plant and site conditions
7.1 Stations at all levels should be equipped with car testing rooms, parking lots, and test road facilities.
7.2 The length, width and height of the car testing rooms at all levels of stations should meet the work needs and meet the requirements of the building standards.
7.3 The longitudinal and lateral slope of the ground of the passage between the inspections should be less than one thousandth, and the ground adhesion coefficient should not be less than 0.7 within the corresponding distance between the front and rear of the vehicle brake test bench.
7.4 The inspection room should have eye-catching station signs, indication signals, lead lines, etc., each station should have a corresponding detection area, the process flow should be arranged reasonably, and each station should not interfere with each other during work.
7.5 The lighting and lighting in the testing room shall comply with the relevant regulations of GB 50033 and GB 50034.
7.6 The air quality in the testing room shall comply with the relevant regulations of TJ 36.
7.7 Compressed air source should be installed in the testing room.
7.8 The design and use of stations at all levels should comply with the relevant regulations of GBJ16, and there must be fire exits, firefighting facilities, etc., and strictly implement the relevant firefighting regulations and regulations.
7.9 The sanitary facilities at all levels of stations shall comply with the relevant regulations of TJ36.
7.10 The power supply facilities of stations at all levels shall comply with the relevant regulations of GB50055.
7.11 The lightning protection facilities in the testing room shall comply with the relevant regulations of GB50057.
7.12 The area of ​​the parking lot should be compatible with the detection capability.
7.13 The test section should meet the relevant requirements in GB7258.
7.14 The entrances and exits of stations at all levels should be unblocked, and there should be guide lanes and necessary traffic signs in the stations.
8 Management system
8.1 Stations at all levels shall formulate the "Quality Management Manual" in accordance with the provisions of measurement certification;
Sweep, welcome attention
Official WeChat of Educational Equipment Procurement Network
Master the latest and most authoritative information in the education equipment industry
Copyright and Disclaimer:
â‘ The copyright of all works on this website that indicate "Source: China Education Equipment Purchasing Network" belongs to China Education Equipment Purchasing Network, and may not be reproduced, edited or used in other ways without authorization from this website. Works that have been authorized by this website should be used within the scope of authorization, and indicate "Source: China Education Equipment Purchase Network". Violators of this website will be held accountable for legal liabilities.
â‘¡ All works on this website that indicate "Source: XXX (non-this website)" are reproduced from other media. The purpose of this reprint is to transmit more information. This does not mean that this website agrees with its views and is responsible for its authenticity. Take direct responsibility and joint liability for infringement of such works. If other media, websites or individuals download and use it from this website, they must keep the "source of the manuscript" indicated on this website, and bear the legal responsibility of copyright and other.
â‘¢ If the content of the work, copyright and other issues are involved, please contact this website within two weeks from the date of publication of the work, otherwise it is deemed to waive the relevant rights.
Stable Blankets ,Waterproof Horse Blanket ,Stable Sheets For Horses,Pony Stable Sheet
NINGBO BRIGHT MAX CO., LTD. , https://www.smartrider-equinebrush.com