Chinese and English Xiangxiang Printing Ink Technology Terms (2)

26. Washable ink washable ink

Used for the printing of a certain type of fabric, the ink is easy to wash away.

27. Metal ink metallic printing ink films

Refers to inks made of metallic pigments, such as gold ink and silver ink.

28. 金墨 gold ink(bronze ink)

The ink that is gold-lustre after printing is made of copper alloy powder.

29. Silver ink silive ink

The silver-gloss ink after printing is made of aluminum powder as a pigment.

30. Pearl ink pearl lusting printing ink

With inks made of pearlescent pigments, the prints have a beautiful pearl luster.

31. Flat light ink (lightless ink) mat ink (dull ink)

Imprinted inks with extremely low or no gloss, also known as matte inks.

32. Fluorescent ink fluorescent ink

Inks made with fluorescent pigments have the property of converting short-wave UV light into longer visible light and reflecting more brilliant colors.

33. Luminous ink

An ink made of a luminescent pigment has the property of emitting pale green phosphorescence in a considerable time after being excited by sunlight or other light sources, and is also called a phosphorescent ink or a luminous ink.

34. Double tone ink double tone ink

An ink containing a soluble dye in the vehicle chain exhibits a double hue on the edge of the print due to the halo of the soluble dye.

35. Two-piece can ink Printing ink for two Piece can tinprinting ink

Suitable for printing on aluminum two-piece can production line.

36. Three-color printing ink three colours process ink

Suitable for three-color printing yellow, magenta, blue three sets of inks.

37. White oil laketine

An emulsifying diluting agent containing a large amount of moisture.

38. Thickener densifier (bodying-agent)

Material to increase the consistency of the ink.

39.Anti-set-off agent

Adding materials that improve the condition of the back of the print.

40. Dryer dryer

The organic or inorganic salts of lead, cobalt, manganese, and other variable metals, and their products, can be added to the ink to accelerate the oxidative polymerization and drying of the ink. These materials are collectively referred to as desiccants, also known as driers.

41. Dry oil paste dryer

Lead-salt-based, cobalt-salt, manganese salt supplemented by the white paste-like body, transferred to the ink to improve the ink oxidative polymerization drying material.

42. Cobalt drying oil

The reddish purple paste made of cobalt salt and oil has a stronger squeezing action than white dry oil and is incorporated into the ink to improve the oxidative polymerization drying property of the ink.

43. Drying retarder

It is an additive containing an antioxidant and has the property of inhibiting or delaying drying of the oxidative polymerization by the ink.

44. Poor filling

Refers to the fact that the gravure ink is too thick, too sticky or too thin, so that the fine lines of the print are discontinuous and disconnected.

45. Fine dot disappears image detail disappearing

Refers to the lack of oiliness of the lithographic ink or the acidity of the dampening water, too much water supply, and the disappearance of fine dots in the printed product.

46. ​​Migration migration

Refers to the phenomenon that the ink on the plastic print is transferred to the back or other packaging products to cause it to be contaminated.

47. Pinhole pinholing ink

Refers to the ink can not properly wet the surface of the substrate and the emergence of beaded holes.

48. Sticking page blocking

Refers to the use of slow-drying ink printing, so that the printed paste into pieces.

49. bleeding when overprinting

Fingerprinting uses inks that are not resistant to solvents. When the solvent-based cover oil covers, the prints are blotted around the prints and the dots are blurred.

50. Strike strike-throngh

The ink on the finger print is often traced on the edge of the print when the paper seeps into the back of the paper.

51. Pasting plate

The thick and sticky inks on the printing press cause the particles, such as paper dust and black skin, to concentrate on the dots of the printing plate.
The impression of the lake is not clear.

52. Dirty scumming

Many ink stains appear on the non-graphic area of ​​fingerprints.

53. greasy greasing

The poor ink repellency of the non-print area of ​​the fingerprint printing plate, as well as the expansion of lines and outlets of printing products, is not clear and incomplete.

54. Willy oil white lake

Also known as dimensional oil, diluting agent made of aluminum hydroxide.


Source: Bison