TEK wireless vacuum cleaner, TEK wireless vacuum cleaner

There are many manufacturers engaged in the production of wireless vacuum cleaners on the market. We are here to introduce you to the TEK brand of wireless vacuum cleaners. How to use TEK wireless vacuum cleaner, how to maintain it, this is the two aspects that TEK wireless vacuum cleaner needs us most attention. Let's take a look.

How to use TEK wireless vacuum cleaner

How to use TEK wireless vacuum cleaner (1) Check before use. Check the vacuum cleaner, power cord, and socket for damage. Check that the circuit is connected properly, connect the ground wire to ensure safe use of electricity, check whether the accessory can be used, and check whether the dust in the dust bag is clean.

Use the TEK wireless vacuum cleaner (2) to select accessories. Select the appropriate attachment according to the location of the vacuum and connect it tightly with the vacuum cleaner. Connect the hose to the vacuum cleaner and connect the hose and hose of the hose.

Depending on the operating surface, different vacuum cleaners can be used to clean the floor. Floor brushes can be used. Some floor brushes are equipped with floor and carpet selection switches, which can be used as needed. Clear dust on sofas, mattresses and clothes should be round. Sofa hoe; if you want to absorb dust from small corners or gaps, use a pointed nozzle.

How to use the TEK wireless vacuum cleaner (3) Clean the front of the cleaned area. Remove large pieces of paper, paper balls, plastic cloth, glass, burning cigarettes, metal fragments or waste larger than the diameter of the suction pipe in the cleaned place, otherwise it will easily damage the dust filter or block the pipe.

Use the TEK wireless vacuum cleaner (4) to adjust the strength. The suction control device is available in manual or automatic position on the armrest. If it is manual control, it must be adjusted to a small size. When the vacuum cleaner starts working, it will be adjusted as needed. If it is automatic control, no manual adjustment is needed.

Use the TEK wireless vacuum cleaner (5) to open the switch and start working. Some vacuum cleaners have only one switch on the casing and can be opened. Some vacuum cleaners have two switches, one on the vacuum cleaner's casing and the other on the handrail. The switch on the vacuum cleaner should be turned on before the switch on the handrail is opened. Either way, you should first stabilize the vacuum cleaner and then turn on the power. When vacuuming, hold the suction tube with your hand and place the suction side of the nozzle naturally on the ground plane, and gently pull it at a speed that is not too fast. When pulling, lift the nozzle face slightly toward one side, push it forward, and lift the front of the nozzle slightly forward. The time of each use should not be too long, preferably no more than 1 hour, in case the motor overheats and burns. When cleaning the carpet, the dust should be removed according to the direction of the carpet surface to make the carpet surface flat and remain the same.

Use the TEK wireless vacuum cleaner (6) to clean the vacuum cleaner. After use, close the switch, remove the power plug, disassemble the accessory and the fuselage, clean the dust on the dust bag and the dust filter, then put the filter back and put it in the dry tool room for use. The dust bag can be washed with detergent, washed with washing, dried and then put into the vacuum cleaner. The dirt on the outer casing, wires and pipes of the vacuum cleaner can be scrubbed with a rag with detergent, then wipe off the residual detergent with water and dry with a dry cloth.

How to maintain TEK wireless vacuum cleaner

How to maintain the TEK wireless vacuum cleaner 1. After use, the dirt in the dust bag should be removed in time, the hair and thread on the brush should be removed, wipe with a damp cloth containing water or neutral detergent, and then dry naturally in the sun. .

How to maintain the TEK wireless vacuum cleaner 2, long-term use will cause the filter mesh to block and cause suction loss. Therefore, the filter and the bag should be cleaned regularly with water. After washing and placing in a cool place to dry and use, the suction can be restored.

Regarding the use and maintenance methods of the TEK wireless vacuum cleaner, we will introduce so much to you today. As long as we use and maintain according to the methods described above, we will be able to fully play the role of TEK wireless vacuum cleaner.