[ Chinese wardrobe network ] First of all, with the change of the bed and the design of the personalized wall lamp, the style of the bedside table is also enriched, and the decorative effect is more important than the practicality. The regular dimensions of the bedside table are as follows:
1, length: 0.48 meters, width: 0.44 meters, height: 0.576 meters.
2, length: 0.60 m, width: 0.48 m, height: 0.55 m.
3, length: 0.60 m, height: 0.55 m, width: 0.45 m.
4, length: 0.62 meters, width: 0.44 meters, height: 0.65 meters.
5, length: 0.52 meters, height: 0.40 meters, width: 0.415 meters.
6, length: 0.52 meters, height: 0.40 meters, width: 0.55 meters.
7, length: 0.56 meters, width: 0.44 meters, height: 0.65 meters.
8, length: 0.56 meters, width: 0.50 meters, height: 0.55 meters.
Through the above introduction, I believe that you have a certain understanding of the regular size of the bedside table. So which size is the most reasonable?
When choosing the size of the bedside table, it is necessary to purchase according to the bed size and color matching of the bedroom, so that the size of the bedside table purchased is the most reasonable. In addition, the purchase knowledge of the bedside table is as follows:
1. Look at the edge of the board. The edge of the high-quality bedside cabinet is fine, smooth and feels good. The sealing line is straight and smooth, and the joint is fine. The professional factory uses a linear edge banding machine to complete the process at one time, with uniform glue and stable pressure to ensure the most accurate size. Most of the non-standard factories are manually operated, with large errors and uneven pressure. Many places are not strong, and harmful substances such as formaldehyde are volatilized.
2, look at punching, bedside cabinets are assembled by assembly, which requires a lot of positioning holes on the board. The fit and precision of the hole position will affect the firmness of the bedside table. The professional factory uses multi-row drilling equipment to complete the punching once, and the positioning accuracy of the hole is guaranteed. Non-standard manufacturers use simple row drills, even pistol drill holes, positioning size error is large, it is difficult to ensure the firmness and accuracy.
3, look at the board, the bedside table is also called the material of the board, is the first process of cabinet production. The professional factory uses electronic cutting saws to control the size of the machine. The size of the board is very high, and there is no collapse at the edge of the board. It does not regulate the use of small manual cutting saws, which have large dimensional errors and often collapse.
4, look at the assembly effect of the whole set of bedside cabinets, any dimensional error of the production process will be expressed on the door panel, the door panel produced by the specialized enterprise is horizontal and vertical, and the gap between the door panels is even, and the gap between the door panels of the manufacturer's bedside cabinets will not appear. Uniform, big and small.
5. Although the slide rails of the bedside table drawers are small details, the hole size and the dimensional error of the plates cause errors in the matching of the sliding rail installation dimensions, resulting in a situation in which the drawer pull is not smooth or the left and right are loose. Also, pay attention to whether the drawer gap is Evenly.
The above is an introduction to the general size of the bedside table and which size is the most reasonable. I hope to help you.
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsdoggze.com