1, before use, please clean the layout of the oil and check the layout of the bumps, scratches and other problems.
2. Some layouts on the market have been processed using special equipment. There is no special situation before the machine does not need to be dealt with. To grind the printing roller, it is recommended to use 1000# sandpaper. Do not use hard, sharp objects to touch or scratch the plate.
3, when used to use the special roller scraper, and must not be replaced with other metal pieces, scraper and layout should be based on the specific printing conditions to maintain the appropriate angle and pressure.
4, after printing, the layout of ink should be immediately cleaned to prevent the residual ink in the pit after the block caused by dry ink.
5. Do not touch or transport the roller with bare hands to prevent oxidation and scratching of the plate; in particular, it is necessary to prevent sweat droplets from splashing onto the plate in summer.
6, the summer temperature, high humidity, save the roll should not be placed in the version of the box. When storing, the surface should be wiped clean, coated with anti-corrosion oil (7# oil is recommended), wrapped with clean plastic film, blanket or corrugated paper from inside to outside, placed in ventilation, drying (temperature 0 °C ~ 30 °C, relative humidity < 65%) of the environment, and away from acids, alkalis and corrosive substances.
Information Processing: Carton Street
Bathtub And Sink Accessories,Antique Tub Feet,Sink Faucets,Abode Sink Accessories
Anping Sunshine Sanitary Ware Co., Ltd. , https://www.sunshinebathtubs.com