With the ever-changing science and technology, and people's growing spending habits, more and more new types of faucets are beginning to appear. And most of the taps have special skills. Today Xiao Bian came to tell you about several new taps.
The
1, automatic charging sensor faucet
Japan inax company recently invented an automatic charging sensor faucet that can use water to solve its own required power. This faucet contains a computer board and a hydro generator with infrared sensors to form a complete system. Putting his hand under the faucet, the sensor sends the signal to the computer in the faucet and turns on the water. When the water flows, it is generated and charged by the hydro-generator and provides its own power. This faucet can also automatically limit the flow of water to save water and save electricity.
2, smart magnetic tap
The faucet has the same appearance as an ordinary commercial faucet, but it is versatile. Its characteristics:
a. When the water supply network is turned off, the faucet is automatically turned off when the faucet is turned on or is being turned on. There will be no running water phenomenon caused by forgetting to turn off the faucet;
b. Mechanically, without energy or power;
c. Magnetized water function;
d, the manufacturing process is simple, mainly based on casting.
3, outside the control of automatic tap
When the hand reaches under the faucet, the faucet will automatically open. When the hand is left, the faucet will automatically close. It is very suitable for public toilets and other places. It is easy to use and sanitary, and it will not cause the phenomenon of running, leaking or dripping, and the production and installation are extremely easy. The automatic device mainly adopts LS-2 type infrared sensor switch, which is a kind of reflective sensor switch module that integrates infrared emission circuit, receiving circuit and drive circuit. It is encapsulated by epoxy resin and its external dimensions are 10×38×. 57mm.
The so-called reflective sensor switch, refers to the LS-2 module itself emits a beam of infrared light, if there is an object in the range of the light block the light, and the light is reflected back to the module, when the reflected infrared light intensity is sufficient, receive The signal will be delayed, recognized, etc. and driven by the monostable output L1 to output high level (up to V+ value) for 1 second and then back to zero (V-value); when the object leaves, no reflected light enters On the receiving side, the circuit-driven monostable output L2 outputs a high level (up to V+ value) for 1 second and then returns to zero (V-value).
<\p><\div>
50Pcs Alcohol Wipe,50Pcs Alcohol Based Wipes,50Pcs Medical Alcohol Wipes,Alcohol Sanitizing Wipes
DONGYANG COMEXA SANITARY PRODUCTDS LTD.,CO , https://www.comexawetwipes.com