The laboratory reactor is a container for chemical reaction. The product has the advantages of simple operation, light structure, convenient access, and the like, and is widely used in various fields. What is the structural principle of the laboratory reactor? The following is a small introduction to the specific introduction, I hope to help everyone.
Laboratory reactor structure principle
1. The sealing of the kettle body and the kettle lid adopts a triangular line type seal and has a long service life.
2. The fastening main seal adopts two open type snap rings, which can be freely pressed against the shoulders of the kettle body and the kettle cover. The eight main tightening bolts are evenly tightened to ensure that the kettle reaches the compression seal. When the unloading is loose, the eight main bolts are loosened, and the snap ring is opened to lift the cap, which is labor-saving and convenient, and is the most ideal structure in modern China.
The lid and the guide column are connected by the lifting arm, and the lifting hand wheel is shaken, and the lifting screw moves to make the lid of the lid move up, down, left and right. The movement of the lifting arm is free to move by the friction reducing action of the ball. .
The rotation of the kettle lid and the tilting of the kettle body are reversed and reset. Firstly, the lid of the kettle is lifted to a certain height by the lifting hand wheel and the lifting screw, and then the fastening hand on the boom is loosened, and the movable cover is pressed by hand to rotate left and right. Then loosen the tightening hand on the rotating seat, press and hold the rotating hook to rotate the tilting handwheel, so that the kettle body can guarantee a certain angle of dumping, and then loosen the rotating hook to cut the material. When the kettle body needs to be reset, shake the handwheel and press and hold the rotary hook to quickly reset. In order not to swing the kettle body to the left and right, the hand should be tilted to control the speed to reach the reset.
3. Rotary agitation is a cylindrical magnetic coupling structure. The magnitude of the torque is determined by the magnetic material. Generally, it is a strong magnetic rare earth with a large coupling force. The motor is used as the power, and the agitator generates sufficient agitation through the coupling. Force, the pulp is replaceable with the operator, and the components such as pulp, anchor, frame, auger worm gear and the like are suitable for the viscosity of various substances.
4. The valve member is provided with a gas phase valve, a liquid phase valve (also called a bottom tube valve), a safety blasting valve, a feed valve, and a discharge valve, which are increased or decreased according to user requirements. The structure of the valve is a reciprocating structure, and its characteristics are 1.5 times longer than that of the rotary valve. The blasting valve is equipped with two safety devices and a single safety device. The rupture diaphragm is adjusted and manufactured by the manufacturer. No adjustment or looseness is allowed. The pressure gauges are indicated directly above.
Shanghai Jiapeng Technology Co., Ltd. specializes in: UV analyzer, three-use UV analyzer, dark box UV analyzer, black box UV analyzer, black box UV analyzer, portable UV analyzer, three-use UV analyzer, dark box , UV detectors, partial collectors, constant current pumps, peristaltic pumps, gel imaging systems, gel imaging analysis systems, chemiluminescence imaging analysis systems, photochemical reactors, vortex mixers, vortex mixers, glass chromatography columns, Gradient mixer, gradient mixer, nucleic acid protein detector, glass chromatography column, fluorescent whitening agent analyzer, fraction collector, rubber cutting instrument, blue gel cutting instrument, chromatography system and other products. Welcome to inquire.
1. The earth auger consists of a small general gasoline engine, a gearbox and a specially designed drill tool. Suitable for drilling in ground, frozen soil and ice. Widely used in gardens, planting, tree planting, geophysical prospecting, road construction and other fields.
2. The dill bit is made of manganese steel to make it harder. It can work on hard soil, super hard soil, clay, frozen soil, etc.
3. According to the tree species, the ground drill can be equipped with a variety of specifications of the drill to meet the needs of users.
4. Ground drilling can liberate people from heavy physical labor, and is widely used in afforestation, planting fruit forests, hedges, and fertilization of fruit trees in autumn. Suitable for all kinds of terrain, high efficiency, easy to carry and field work.
5. The ground drill can be operated by single person or double person, which is economical and practical.
post hole digger machine price,ground hole drill machine,tree planting earth auger
Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com