[ Chinese wardrobe network ] Nowadays, when people buy wardrobes , they often pay too much attention to the appearance and functionality of the wardrobe, and often ignore some details, which may affect the quality of life in the future. So, let's talk about the relevant knowledge about wardrobe purchase.
Which kind of wardrobe is good?
1, fir integrated board
The fir board is also called the finger joint board. It is a small piece and a small piece of splicing. All the joints are glued. Secondly, the wood is soft, not strong enough, and easily deformed and cracked. Third, Its surface is not flat, easy to draw clothes, and the solution to the tick is to polish the paint, which will cause a large degree of use, two breath, not environmentally friendly, three paints easily change color, crack, fall off. Fourth, it is easy to insects and difficult to care.
2, pure solid wood, imitation wood, solid wood veneer
The base material used for solid wood furniture is natural wood, and the real pattern of wood can be seen on the surface. Pure solid wood furniture means that all the materials of the furniture are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of pure solid wood, and no other type of artificial board is used. Pure solid wood furniture has high requirements on craftsmanship and materials. The requirements for material selection, drying, finger jointing and seam-sealing of solid wood are very strict. If any process is not tight, small cracks and loose joints will occur. Then the whole set of furniture was so deformed that it could not be used.
Imitation wood furniture, from the appearance of solid wood furniture, wood's natural texture, feel and brilliance are exactly the same as solid wood furniture, but in fact, the furniture mixed with solid wood and wood-based panels, that is, side panels, bottom, shelf and other components Thin wood veneered particleboard or MDF fiberboard, doors and drawers are made of solid wood. This process saves wood and reduces costs. So it is more acceptable in terms of price. Furniture manufacturers sometimes paint varnish or matt lacquer for solid wood furniture to express the natural brilliance of wood. Solid wood veneer generally refers to the veneer of solid wood, the surface of the solid wood, inside is the MDF. The function is not chaotic than pure solid wood, it is not easy to crack, but it is not as environmentally friendly as pure solid wood.
3, trimeric hydrogen ammonia plate
Melamine board, the full name is melamine impregnated film paper veneer wood-based panel. It is used to put paper with different colors or textures into the melamine resin adhesive to be soaked, then dried to a certain degree of curing, and laid on the surface of particleboard, medium density fiberboard or hardboard, which is hot pressed. Decorative plates. At present, the substrates used in panel furniture on the market are all such panels, and the substrate is divided into a trimeric hydrogen ammonia particle board and a trimeric hydrogen ammonia density board. The melamine board has more changes in design and more personality. It is the material of choice for European top furniture manufacturers, but the environmental requirements for the board are very strict and must reach the European E1 scale.
4, wood board
The wood board is the boarding board of the city market. It is a board which is glued and hot pressed by natural rotary cutting veneer and solid wood board. According to the quality of the material and the texture of the surface material can be divided into "excellent products", "first-class products" and "qualified products." The inner core is also made of poplar, birch, pine, or paulownia. The face material may be one or two layers of veneers respectively on both sides of the core, and may be classified into three layers of blockboard and five layers of blockboard. During the production of blockboard, there will be problems such as excessive formaldehyde release, lateral static bending strength, product moisture content difference, and low bonding strength. The addition of a layer of three-ply board with wood grain to the blockboard and then painting is a common practice in woodworking furniture.
Wardrobe purchase considerations
1, first look at the selection of the wardrobe. Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, we must first look at whether the merchant has a plate inspection report and relevant test certificate from the national authority inspection department.
2. Look at the veneer of the plate. Some wardrobes look good on the surface. In fact, with a finger stroke, you can draw obvious scratches. These wardrobes are made of surface-coated vellum paper and ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional manufacturers use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment. The surface strength is high, abrasion resistance and scratch resistance.
3. Look at the edge of the board. Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
4. Look at the processing method. Professional manufacturers use professional automatic edge banding machine, using environmentally friendly hot melt adhesive to seal the edges, and the veneer is firm. The auxiliary materials used in the production process are environmentally friendly, in order to ensure the environmental protection of the final produced wardrobe, and to ensure that there are no harmful substances. Some manufacturers, without professional processing equipment, use ordinary universal glue to manually seal the edges, easy to pull off the drum. In addition, the harmful substances such as benzene and formaldehyde contained in this rubber are seriously exceeded, posing a potential threat to human health.
5. Look at the backplane structure. Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer, and a trough-type reverse leather lap joint structure to prevent the back plate from directly absorbing the moisture on the wall surface. Some brands have thin back plates and are connected by nail-type back plates. The back plates are in direct contact with the wall. The moisture on the wall is easily absorbed by the plates, which is easy to get wet, moldy and deformed, and the cabinet loses its seal. Sex.
6, see if it is customized for professional home. Brand wardrobes are professionally produced. Functional parts (drawers, trousers racks, tie trays, etc.) are standard designs. The width, depth and height are standard. At the same time, in order to meet the individual needs of customers, we also provide customized quality. And in line with the concept of professional custom home.
7, look at hardware accessories. Professional manufacturers use famous factory accessories, quality assurance. Accessories are often hidden, consumers are difficult to identify, and you have to carefully push and pull. Accessories are an important element of wardrobes, bookcases and sliding doors, and are important indicators for ensuring the comfort and durability of household products.
8, look at the manufacturer's anti-counterfeiting signs and services. Professional manufacturers in the wardrobe edge strips, cabinet door profiles, pulleys, and even sheet veneers, there are obvious manufacturers, quality, maintenance are guaranteed, consumers can rest assured to use.
The above is the relevant knowledge about the wardrobe purchase for everyone, I hope to help everyone, more home knowledge, please pay attention to the website.
Temporary Hair Dye Use to enhance tones, refresh existing color, or play with fashion shades. Nourishing color is designed to fade out gradually over time.
Flamingo Pink Temporary Hair Color Spray
DELIN HAIR COSMETICS , https://www.hairstylingwaxfactory.com