[ Chinese wardrobe network ] Modern home decoration often uses the design of the wall cabinet. As one of the standard for household storage, the decoration of the room wall cabinet needs to consider its usability and aesthetics. In the installation, the practical skills of room wall cabinet decoration are as follows.
First, room wall cabinet decoration: measurement of the wall cabinet
Room wall cabinet decoration can be either a wall or a mezzanine, so as to ensure the effective use of space without deformation. However, the top and bottom levels must be vertical and the sides should be vertical. If there is any error, the height difference between the left and right sides of the hole should be less than 5mm. The bottom wheel of the closet door can compensate for the error through the debugging system.
Second, room wall cabinet decoration: the design of the partition
The installation of the partitions generally has a drawer design. In order not to affect the use, the position of the drawer should be designed: when making three sliding doors, avoid the intersection of the two doors; when making two sliding doors, place them in one. One side of the door body; when the folding door is made, the drawer should have a 17cm gap from the side wall.
Third, the room closet decoration: the installation of the track
When the rail is installed, the size of the rail should be reserved for the cabinet. The upper and lower rails are reserved for the folding door 8cm and the sliding door 10cm.
Fourth, room wall cabinet decoration: professional installation of the wall cabinet
The installation of the cabinet door is professionally guaranteed. The installation of the cabinet door is generally done by a professional. The steps are: first fix the top rail, the front surface of the rail is in the same plane as the surface of the cabinet, and the upper and lower rails are placed in a reserved position; Two doors are installed in the track, and the verticality of the door body is measured by a horizontal ruler or a straight ruler, and the position of the upper and lower rails is adjusted and fixed; again, whether the door body is parallel with the two sides, the door body can be adjusted by adjusting the bottom wheel to reach the frame. Level with both sides; finally fix the anti-jump device and present the quality protection book.
Auswei Paper(Jiangmen)Co.,Ltd , https://www.pleespaper.com